video corpo

Direct Georeferencing for Photogrammetry Using Inertial Labs INS-B - 6 Pages

Add to MyAeroExpo favorites
Direct Georeferencing for Photogrammetry Using Inertial Labs INS-B

Catalog excerpts

Direct Georeferencing for Photogrammetry Using Inertial Labs INS-B

 Open the catalog to page 1

Aerial Photogrammetric analysis may be applied to a single image or high-speed imagery and remote sensing to detect, measure and record complex 3D motion fields. This is done by feeding measurements and image analysis into computational models that estimate the relative motions and positions with increasing accuracy. While in its early days it was used mostly for topographic mapping, it's application base has recently expanded into numerous industries. Modern sensors and software capabilities allow for the creation of precise 3D renderings and point cloud generation which is widely used in...

 Open the catalog to page 2

Limitations of Aerial Triangulation with GCPs EXAMPLES OF LANDSCAPES AND CONDITIONS WHERE PLACEMENTS OF GCP IS DANGEROUS, TIME-CONSUMING OR SIMPLY NOT POSSIBLE GCPs are used to help relocate images into local coordinate systems. Even though at first sight GCPs may seem to be a cheaper option, in the long run they are limited in their usability and create a tremendous amount of extra work. Installing and maintaining GCPs around a very small plot of land may be a job worth tackling, but when it comes to a larger or complex landscapes where manual installation of GCPs is nearly impossible, an...

 Open the catalog to page 3

Direct Georeferencing with GPS-Aided INS Direct Georeferencing with a GPS-Aided INS is a technique used for aerial photogrammetry when traditional methods simply aren't efficient enough for the application. Unmanned Aerial Vehicles (UAVs) often use a GPS-Aided INS with aiding data from a high-resolution camera/laser to accurately capture and map the Earth's surface. For Inertial Labs these GPS-Aided INS's include features like: • Embedded GNSS receiver, with up to 1 cm + 1 ppm RTK position accuracy • Powerful Magnetometers with correcting data from high-grade Gyroscopes (1 deg/hr bias inrun...

 Open the catalog to page 4

Standalone Solution: INS-B The Inertial Labs GPS-Aided INS-B is new generation of: fully-integrated; combined GPS, GLONASS, GALILEO, QZSS, BEIDOU and L-Band navigation; and high-performance strap down system that determines Position, Velocity, Pitch, Roll and Yaw with high accuracy for both motionless and dynamic applications. It utilizes an advanced single antenna GNSS receiver, barometer, 3-axes each of calibrated in full operational temperature range precision Accelerometers and Gyroscopes. Its also armored with a sensors fusion filter, state of the art navigation algorithms and...

 Open the catalog to page 5

Established in 2001, Inertial Labs is a leader in position and orientation technologies for commercial, industrial, aerospace and defense applications. Inertial Labs has a worldwide distributor and representative network covering 20+ countries across 6 continents and a standard product line spanning from Inertial Measurement Units (IMU) to GPS-Aided Inertial Navigation Systems (INS). With application breadth on Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies and solutions. Inertial Labs, Inc. 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 USA phone: +1...

 Open the catalog to page 6

All Inertial Labs catalogs and technical brochures

  1. OptoAHRS-II

    5 Pages

  2. OS3D-DTS

    7 Pages

  3. MRU

    6 Pages

  4. MRU-PD

    4 Pages

  5. WAVE Sensors

    4 Pages

  6. OS3DM

    5 Pages

Archived catalogs