video corpo

Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver
6Pages

{{requestButtons}}

Catalog excerpts

Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 1

Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver

Open the catalog to page 1
Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 2

Value Added AHRS Since its first release, the Inertial Labs Attitude and Heading Reference System (AHRS) has continued to develop and improve in its performance as well as its integration abilities. The newest addition, the AHRS-II-P, is a compact, lightweight, and affordable solution both as a standalone reference unit or a solution where applications involving the integration of an external compass or GNSS receiver may be needed to improve an existing system. Although the AHRS-II-P comes standard with an embedded fluxgate magnetometer to determine accurate Heading, input is supported for...

Open the catalog to page 2
Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 3

Don't Overpay, Choose Smart! Here is cost and functional comparison of the AHRS-II-P, AHRS-II-P with external GNSS receiver, and similar product from a competitor. We understand that for every application there is a certain set of requirements. Inertial Labs is working hard to build a perfect solution for every application while also ensuring the customer does not overpay. As you may see from the table, an external GNSS receiver alone would add several critical states of a system to output. This in turn would cover a wider variety of applications while as you can see, still can stay at a...

Open the catalog to page 3
Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 4

Test Results of AHRS-II-P with External GNSS Input For this test procedure, the Inertial Labs AHRS-II-P was mounted to the floor of a test vehicle. The external GNSS receiver was mounted to the ceiling, and the respective antenna was mounted on the roof of the vehicle. The test duration was approximately 25 minutes long, and was performed at an average speed of 25 mph (11.18 m/s) in the suburban area shown in the picture below. Values displayed below in the table are the errors which have been determined by comparing the real time results of the data acquired during the test and the...

Open the catalog to page 4
Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 5

When it comes to choosing what model needs to be selected and integrated into a whole solution, it's imperative for businesses to stay within the most efficient Return of Investment (ROI). When investigating an investment into the proper AHRS unit, a thorough analysis of what pieces of data are required for your application is crucial. For example, if all the application requires is orientation (pitch, roll, and Heading/yaw), then the AHRS may provide an inexpensive solution. In cases where additional parameters are needed such as precise position coordinates, and velocity; then a potential...

Open the catalog to page 5
Attitude and Heading Reference System (AHRS) Supports Data Input From External Single or Dual GNSS Receiver - 6

Established in 2001, Inertial Labs is a leader in position and orientation technologies for commercial, industrial, aerospace and defense applications. Inertial Labs has a worldwide distributor and representative network covering 20+ countries across 6 continents and a standard product line spanning from Inertial Measurement Units (IMU) to GPS-Aided Inertial Navigation Systems (INS). With application breadth on Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies and solutions. Inertial Labs, Inc. 39959 Catoctin Ridge Street, Paeonian Springs, VA 20129 USA phone: +1...

Open the catalog to page 6

All Inertial Labs catalogs and technical brochures

  1. OS3D-FG

    6 Pages

  2. OS3DM

    5 Pages

Archived catalogs

  1. OS3D-DTS

    7 Pages