Impinj’s Monza® X-2K Dura and Monza® X-8K Dura chips enable users to communicate wirelessly with the processor inside electronic devices using standard UHF Gen 2 RFID readers, unlocking many new benefits for consumer electronics manufacturers, retailers and end users. Embedded directly into the circuit board of an electronic device, Monza X chips link to the device’s processor through a standard I2C bus, enabling the processor or a UHF reader to read and write the Monza X chip memory even when the electronic device is powered off. By enabling electronic devices to communicate with RFID readers, Monza X chips deliver a wide range of extended capabilities such as theft deterrence in the supply chain and wireless device configuration at point of sale and beyond. Monza X chip features include: > 2 kbits or 8 kbits user memory accessible through both RF to reader devices and I2C interface to microprocessors > Impinj’s QT® technology and one time programmable memory blocks for privacy and security of sensitive information stored in the chip > Superior passive read/write sensitivity and the ability to boost sensitivity by supplying DC power > Two fully independent antenna ports, enabling multiple configurations for far field and near field RFID applications > Ability to wake up the microprocessor from low power states in response to RF write event, enabling power efficient electronic devices Wireless Displays and Sensors Product Activation/ Theft Deterrent Late Stage Upgrades and Configu

Monza X Dura Chip Models Impinj* Copyright © 2012, Impinj, Inc. Monza, OT and Impinj are registered trademarks of Impinj, Inc. Impinj, Inc. 701 N. 34th Street, Suite 300 Seattle, WA 98103 www.impinj.com [email protected] Tel: 206.517.5300 Fax: 206.517.5262 Introducing Monza X UHF RFID Chip © 2012, Impinj, Inc.