video corpo

IFACE

IFACE

IFACE

Product catalog summary
Certification: The document mentions DEEE certification, indicating compliance with environmental standards.
Key Features: The ievo iface is an advanced facial recognition terminal that uses dual cameras (visible light and NIR) for high accuracy and anti-spoofing. It supports touchless access control, operates at a distance of 0.4 to 2 meters, and includes a built-in RFID card reader for two-factor authentication.
Product Specifications: The device operates on 15Vdc power input with PoE+ support. It features a 2GB RAM, 8GB Flash memory, and supports up to 20,000 users in its database. The recognition speed is 1 second in 1:N mode, and authentication speed is 0.3 seconds in 1:1 mode. It includes a 5-inch touch display and weighs 450g.
Electrical Specifications: The iface requires a power input of 15Vdc @ 2A, with a tolerance of 12V-25Vdc. It can also be powered via PoE+ (IEEE 802.3at).
Mounting and Connectivity: The terminal can be mounted on walls, desktops, or turnstiles. It includes connections for RJ45 LAN, Wiegand IN/OUT, GPIO, RS485, and dry contact relay.
Warranty: The product comes with a 5-year warranty.
See more

Catalog excerpts

IFACE-1

Datasheet ievo iface™ - Facial Recognition Terminal The ievo iface is an advanced face recognition terminal. It combines highly accurate face recognition with very efficient processing of face images for high matching accuracy. iface utilises two separate cameras: one using visible light and one in the NIR (near-infrared) spectrum. This dual-camera setup optimises face matching and live face detection for anti-spoofing purposes. iface authenticates and authorises users in only 1 second. Operating at a distance of 0.4 to 2 metres, the system provides a safe and fully touchless access control solution. The device mounts on walls, desktops and turnstiles, accommodating a wide range of environments. In addition, the builtin RFID card reader with MIFARE®, DESFire® EV1 and FeliCa® protocols enables two-factor authentication with card access where required. Key Features Standalone or Wiegand - Integrates with the ATRIUM online access control system MIFARE® DESFire® EV1 FeliCa® built-in • card reader • Dual camera for optimised face matching Certification Certification • Built-in light for use in low light conditions • Automatic capture of people Fake face detection (anti-spoofing) & tamper detection • Voltage (12Vdc) and PoE versions available • For internal use only CDVI UK Unit B1, Knaves Beech Business Centre, Davies Way, High Wycombe, HP10 9QR All the information contained within this document (pictures, drawings, features, dimensions, specifications), could be perceptibly different and can be changed without prior notice. Published: 04 December 2024. CDVI_IFACE_DS_03_EN-FR_A4

 Open the catalog to page 1
IFACE-2

Product Specifications ISO/IEC 14443 for MIFARE® DESFire® EV1, FeliCa® RJ45 for LAN, Wiegand IN/OUT, GPIO (3), RS485, dry contact relay, Standard 10/100 BaseT and GigE 2, for facial recognition (visible light) & detection (NIR) Wall, desktop, turnstile and other Height range angle: 145cm - 210cm at 70cm standoff (at 135cm installation height) Face capture range: 0.4m - 2m Database: Enrollment Speed: Recognition speed: 1.0 sec in 1:N mode with 20,000 users in on-board database Authentication speed: ARM Cortex A53 Octa-core (8 core) operating at 1.4GHz Electrical Specifications Power input: • Power...

 Open the catalog to page 2

All I-Evo Ltd catalogs and technical brochures

  1. IEVO-UDR

    2  Pages

  2. IEVO-M+

    2  Pages

  3. IEVO-U

    2  Pages

  4. IEVO-M

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.