ievo Enclosed Power Supply
ievo Enclosed Power Supply
- IP65 rated for protection against dust and water when using correctly rated cable glands.
- Vandal resistant with an IK07 certification.
- Wide input voltage range of 100-240 VAC.
- Class I switch mode power supply with mains and battery charge level indicators.
- Built-in charging and battery protection circuit.
- Internally fused with isolation from the front of the enclosure.
- Small footprint with integrated rear mounting holes for easy installation.
- Simple hinged lid and a 2-year warranty.
- CE compliant.
- Output: 13.8V, 2.8A, with a peak current range of 0 - 4.3A.
- Charging: 13.8V, 1.5A.
- Rated power: 59.34W with a ripple and noise max of 120mVp-p.
- Voltage tolerance: ±1.0%, line regulation: ±0.5%, load regulation: ±0.5%.
- Setup and rise time: 800mS, 50mS/230VAC ~ 1600mS, 50mS/115VAC at full load.
- Hold up time: 50mS/230VAC ~ 10mS/115VAC at full load.
- Overload and over voltage protection with hiccup mode recovery.
- Battery cut-off at 10.5±0.5V.
- AC OK and battery low indicators with TTL open collector output.
- Operating temperature range: -20°C to +70°C.
- Operating humidity: 20 to 90% RH non-condensing.
- Storage temperature and humidity: -20°C to +85°C, 10 - 95% RH non-condensing.
- Vibration resistance: 10 - 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes.
- Complies with EN61000-4-2,3,4,5,6,8,11, EN55024, and light industry level criteria A.
- Safety standards: UL60950-1, TUV EN60950-1 approved, CE.
- Withstand voltage: I/P-O/P:3KVAC, I/P-FG:1.5KVAC, O/P-FG:0.5KVAC.
- Isolation resistance: 100M Ohms/500VDC/25°C/70%RH.
- EMC emission compliance: EN55022 (CISPR22) Class B, EN61000-3-2, -3.
- Width: 289mm
- Height: 239mm
- Depth: 107mm
Catalog excerpts
levo Security solutions as individual as you are.TM Product Datasheet ievo Enclosed Power Supply FEATURES: • High Quality & Reliability • IP65 Rated (using correctly rated cable glands) • Vandal resistant - IK07 (in louse certified) • Wide input voltage range (100-240 VAC) • Class I switch mode power supply • Mains & battery charge level indicator • Built-in charging & battery protection circuit • Internally fused • Isolate from front of enclosure • Small footprint & integrated rear mounting holes for simple installation • Simple hinged lid • 2 years warranty The ievo enclosed PSU has been specifically designed to work with ievo biometric infrastructures, with room to feature both a suitable battery for backup and an ievo control board. The non-intrusive unit is compliant with relevant European directives (CE) and standards. Performing the simple function of mounting and powering an ievo biometric control board for remote ievo fingerprint reader devices, the enclosure can be easily installed/mounted to walls or fascia for discrete positioning. For technical features and details please see overleaf. Please note, ievo control board and backup battery are not supplied as standard. Recommended battery - Yuasa NP7-12 (or similar)
Open the catalog to page 1
ievo Security solutions as individual as you are. or call us on: 0845 643 6632 or +44 (0)191 296 3623 To find out more, visit: TECHNICAL DATA:
Open the catalog to page 2All I-Evo Ltd catalogs and technical brochures
Archived catalogs
ievo USB Registration Units2 Pages
ievo Ltd Product Catalogue 201612 Pages
