HT2000-F-40-50-60

Product catalog summary

Overview: The HT2000 is a mobile hydraulic test stand designed for aircraft maintenance, specifically for tasks outlined in AMM/ATA Chapter 29. It is suitable for filling, draining, and flushing aircraft hydraulic systems to NAS1638 Class 6 or better, and provides hydraulic supply for RAT tests.

Model Variants: The HT2000 is available in different flow ranges: 0-40 USGPM, 0-50 USGPM, and 0-60 USGPM. It can be configured as a single system (S) or a dual system (S2).

Key Features:

Axial piston pump with variable stroke and proportional control.
Stainless steel reservoir (240-300 liters) with a large fuel tank for 8-hour operation.
Fluid contamination level maintained at NAS 1638 Class 6 or better.
Equipped with an oil-air cooler, temperature and pressure shut down switches, and an operator panel with digital display.
Controlled by a PLC system with safety devices, and features a weatherproof operator panel.
Heavy-duty frame with lifting points and a maximum towing speed of 16 km/h.

Technical Specifications:

Hydraulic hoses: 9 meters for single system, 12 meters for dual system.
Noise level: Less than 86 dBA at 2 meters.
Hydraulic pressure: 300-3000 psi with high and low-pressure filters.
Engine: Deutz 4-stroke Tier II, with power output varying by model.
Dimensions: Length 3680 mm, Width 1750 mm, Height 1625 mm, Weight approx. 3400 kg.

Optional Features: Options include quick disconnect couplings, integrated purifier, particle counter, water sensor, and emission standard diesel engine Stage V / Tier IV Final.

Contact Information: HYCOM B.V., Apeldoorn, Netherlands. Phone: +31 88 0597 200, Email: [email protected], Website: www.hycom.nl

Catalog excerpts

HYCOM DATASHEET MOBILE HYDRAULIC TEST STAND FOR AIRCRAFT MAINTENANCE MODEL HT2000 engine driven MAINTENANCE AND OVERHAUL CHECKS OF AMM / ATA CHAPTER 29 FILLING AND DRAINING OF AIRCRAFT RESERVOIR FLUSHING OF AIRCRAFT HYDRAULIC SYSTEM TO CLASS 6 NAS1638 OR BETTER HYDRAULIC SUPPLY FOR RAT TESTS WITH HYCOM GROUND CHECK MOTOR FLOW RANGE ● = - : 0-40 USGPM ● = 1 : 0-50 USGPM ● = 3 : 0-60 USGPM OUTPUT = S : SINGLE SYSTEM = S2

Open the catalog to page 1

FEATURES • Single system (S): one pressure and one return line or • Dual system (S2): single system with two pressure and two return lines with shutoff valves • • • • • Axial piston pump variable stroke with proportional control of flow and pressure Boost pump for closed loop circuit Stainless steel reservoir of 240 liter with drain valve and filling cap (300 liter for model HT2000-3) Large fuel tank for 8 hours operation Fluid contamination level NAS 1638 class 6 or better Oil-air cooler with low noise level suitable for tropical conditions Open loop configuration for filling and draining of...

Open the catalog to page 2

A Digital display with failure and maintenance notifications B Digital readout of acutal flow C High and return pressure gauges

Open the catalog to page 3

TECHNICAL DATA GENERAL Hydraulic hoses – single system: Hydraulic hoses – dual system: Noise level: 9 meter 12 meter less than 86 dbA at 2 meters distance HYDRAULIC Fluid phosphate ester based e.g. Skydrol or Hyjet 300-3000 psi at 40-50-60 USGPM High (3 micron) and low pressure (10 micron) filters with electric clogging indicators MEASUREMENT High pressure gauge 0-5000 psi Accuracy 1% of full scale Return pressure gauge 0-200 psi Accuracy 1% of full scale Digital readout of actual flow suitable for TARAN or ITCAN leak test procedures. Accuracy of 0,3% of measured value POWER Engine Deutz 4-stroke...

Open the catalog to page 4

DIMENSIONS & WEIGHT Quick disconnect couplings to connect hoses to the aircraft PUR = Integrated purifier for filtering, degassing and dewatering PC = Integrated particle counter and water sensor Emission standard diesel engine Stage V / Tier IV Final Other options and accessories are available upon request.

Open the catalog to page 5