HT2000-E-X350-50-55-60

Product catalog summary

Overview: The HT2000 electric-driven mobile hydraulic test stand is designed for aircraft maintenance, specifically for tasks related to AMM/ATA Chapter 29. It is suitable for filling, draining, and flushing aircraft hydraulic systems to NAS1638 Class 6 or better, and provides hydraulic supply for RAT tests.

Model Specifications: The HT2000 model offers three flow ranges: 0-50 USGPM, 0-55 USGPM, and 0-60 USGPM. It is available in single (S) or dual (S2) system configurations, with dual systems featuring two pressure and return lines.

Key Features:

Automatic safety features to prevent overpressure.
Axial piston pump with proportional control.
Stainless steel reservoir with a capacity of 240 liters (300 liters for model HT2000-3).
Oil-air cooler suitable for tropical conditions.
Operator panel with digital display for maintenance and failure notifications.
PLC-controlled system with safety devices.
Weatherproof operator panel cover and steel canopy with phosphate-ester resistant paint.

Technical Data:

Main power supply: 3 Ph. 380/420 V – 50 Hz.
Noise level: Less than 75 dBA at 1 meter.
Hydraulic pressure range: 300-5000 psi.
High and low-pressure filters with clogging indicators.
Dimensions: Length 3680 mm, Width 1750 mm, Height 1665 mm, Weight approx. 2750 kg.

Options: Available options include quick disconnect couplings, integrated purifier, particle counter, and water sensor. Additional options are available upon request.

Contact Information: HYCOM B.V., P.O. BOX 1079, 7301 BH Apeldoorn, Antillen 43, 7333 PE Apeldoorn, Phone: +31 88 0597 200, Email: [email protected], Website: www.hycom.nl

Catalog excerpts

HYCOM DATASHEET MOBILE HYDRAULIC TEST STAND FOR AIRCRAFT MAINTENANCE MODEL HT2000 electric driven MAINTENANCE AND OVERHAUL CHECKS OF AMM / ATA CHAPTER 29 FILLING AND DRAINING OF AIRCRAFT RESER VOIR FLUSHING OF AIRCRAFT HYDRAULIC SYSTEM TO CLASS 6 NAS1638 OR BETTER HYDRAULIC SUPPLY FOR RAT TESTS WITH HYCOM GROUND CHECK MOTOR ● = 1 : 0-50 USGPM ● = 2 : 0-55 USGPM ● = 3 : 0-60 USGPM OUTPUT = S : SINGLE SYSTEM = S

Open the catalog to page 1

FEATURES • Single system (S): one pressure and one return line or • Dual system (S2): single system with two pressure and two return lines with shutoff valves Side 1 output 3000 psi, side 2 output 5000 psi Full automatic safety feature to avoid applying 5000 psi on 3000 psi aircrafts • • • • Axial piston pump variable stroke with proportional control of flow and pressure Boost pump for closed loop circuit Stainless steel reservoir of 240 liter with drain valve and filling cap (300 liter for model HT2000-3) Fluid contamination level NAS 1638 class 6 or better Oil-air cooler with low noise level...

Open the catalog to page 2

A Digital display with failure and maintenance notifications B Digital readout of acutal flow C High and return pressure gauges

Open the catalog to page 3

TECHNICAL DATA GENERAL Main power supply cable: Hydraulic hoses: Noise level: 12 meter 10 meter less than 75 dbA at 1 meter distance HYDRAULIC Fluid phosphate ester based e.g. Skydrol or Hyjet 300-5000 psi at 50-55-60 USGPM High (3 micron) and low pressure (10 micron) filters with electric clogging indicators MEASUREMENT High pressure gauge 0-6000 psi Accuracy 1% of full scale Return pressure gauge 0-200 psi Accuracy 1% of full scale Digital readout of actual flow suitable for TARAN or ITCAN leak test procedures. Accuracy of 0,3% of measured value. POWER Supply 3 Ph. 380/420 V – 50 Hz, other...

Open the catalog to page 4

DIMENSIONS & WEIGHT Quick disconnect couplings to connect hoses to the aircraft PUR = Integrated purifier for filtering, degassing and dewatering PC = Integrated particle counter and water sensor Other options and accessories are available upon request.

Open the catalog to page 5