HT2000-E-40-50-55

Product catalog summary

Overview: The HT2000 electric-driven mobile hydraulic test stand is designed for aircraft maintenance, particularly for maintenance and overhaul checks of AMM/ATA Chapter 29, filling and draining aircraft reservoirs, flushing hydraulic systems to NAS1638 Class 6 or better, and providing hydraulic supply for RAT tests.

Model and Flow Range: The HT2000 model offers different flow ranges: 0-40 USGPM, 0-50 USGPM, and 0-55 USGPM. It is available in single (S) or dual (S2) system configurations.

Key Features:

Stainless steel reservoir with a 240-liter capacity.
Axial piston pump with variable stroke and proportional control.
Boost pump for closed-loop circuits and oil-air cooler for tropical conditions.
Operator panel with digital display for maintenance and failure indications.
Flow and pressure settings via potentiometer and push buttons.
Weatherproof cover and heavy-duty frame with drip tray.
Maximum towing speed of 16 km/h and parking brake on front wheels.

Technical Data:

Main power supply: 3 Ph. 380/420 V – 50 Hz.
Noise level: Less than 75 dBA at 1 meter.
Hydraulic fluid: Phosphate ester-based, e.g., Skydrol or Hyjet.
Pressure range: 300-3000 psi at 40-55 USGPM, 4000 psi at reduced flow.
Dimensions: Length 3230 mm, Width 1750 mm, Height 1625 mm, Weight approx. 2600 kg.

Options: Quick disconnect couplings, integrated purifier, particle counter, and water sensor are available as options.

Contact Information: HYCOM B.V., Apeldoorn, Netherlands. Phone: +31 88 0597 200, Email: [email protected], Website: www.hycom.nl

Catalog excerpts

HYCOM DATASHEET MOBILE HYDRAULIC TEST STAND FOR AIRCRAFT MAINTENANCE MODEL HT2000 electric driven MAINTENANCE AND OVERHAUL CHECKS OF AMM / ATA CHAPTER 29 FILLING AND DRAINING OF AIRCRAFT RESER VOIR FLUSHING OF AIRCRAFT HYDRAULIC SYSTEM TO CLASS 6 NAS1638 OR BETTER HYDRAULIC SUPPLY FOR RAT TESTS WITH HYCOM GROUND CHECK MOTOR FLOW RANGE ● = - : 0-40 USGPM ● = 1 : 0-50 USGPM ● = 2 : 0-55 USGPM OUTPUT = S : SINGLE SYSTEM = S2

Open the catalog to page 1

Single system (S): one pressure and one return line or Dual system (S2): single system with two pressure and two return lines with shutoff valves Stainless steel reservoir of 240 liter with drain valve and filling cap Axial piston pump variable stroke with proportional control of flow and pressure Boost pump for closed loop circuit Fluid contamination level NAS 1638 class 6 or better Oil-air cooler with low noise level suitable for tropical conditions Open loop configuration for filling and draining of A/C reservoir and RAT tests Temperature and boost pressure shut down switches Oil sample point...

Open the catalog to page 2

A Digital display with failure and maintenance notifications B Digital readout of acutal flow C High and return pressure gauges

Open the catalog to page 3

TECHNICAL DATA GENERAL Main power supply cable Hydraulic hoses – single system Hydraulic hoses – dual system Noise level 12 meter 9 meter 12 meter less than 75 dbA at 1 meter distance HYDRAULIC Fluid phosphate ester based e.g. Skydrol or Hyjet 300-3000 psi at 40-50-55 USGPM, 4000 psi at reduced flow High (3 micron) and low pressure (10 micron) filters with electric clogging indicators MEASUREMENT High pressure gauge 0-5000 psi Accuracy 1% of full scale Return pressure gauge 0-200 psi Accuracy 1% of full scale Digital readout of actual flow suitable for TARAN or ITCAN leak test procedures. Accuracy...

Open the catalog to page 4

DIMENSIONS & WEIGHT Quick disconnect couplings to connect hoses to the aircraft PUR = Integrated purifier for filtering, degassing and dewatering PC = Integrated particle counter and water sensor Other options and accessories are available upon request.

Open the catalog to page 5