*myaeroexpo

HFP-04

Product catalog summary

Overview: The HYCOM HFP model is a hydraulic fluid purifier designed for aircraft maintenance, specifically for dewatering, filtering, and degassing hydraulic fluids. It supports both mineral and phosphate ester-based fluids and provides digital readouts according to NAS 1638 or ISO 4406:1999 standards.

Key Features:

Purification modes include aircraft hydraulic system maintenance, hydraulic test stand purification, and internal reservoir purification.
Removes water to less than 100 ppm and 100% free and 95% dissolved gases.
Equipped with integrated heaters, a large touchscreen operator panel, and a PLC system with safety features.
Connectivity for condition monitoring via computer and smartphone.
Stainless steel reservoir with a capacity of 250 liters, gear pumps, and a plate heat exchanger.
Weatherproof cover, heavy-duty frame, and easy maintenance access.

Technical Specifications:

Main power supply: 3 Phase, 380/420 V – 50 Hz, 63 A.
Maximum inlet flow: 60 USgpm (227 l/min); Internal pump flow: 15 l/min.
Dimensions: Length 226 cm, Width 145 cm, Height 160 cm; Weight: approx. 1100 kg.
Hydraulic hose length: 6 meters; Main power supply cable: 20 meters.

Options: Quick disconnect couplings and other accessories available upon request.

Contact Information: HYCOM B.V., Apeldoorn, Netherlands. Phone: +31 88 0597 200, Email: [email protected], Website: www.hycom.nl

Catalog excerpts

HYCOM DATASHEET HYDRAULIC FLUID PURIFIER FOR AIRCRAFT MAINTENANCE MODEL HFP IDEAL FOR DEWATERING, FILTERING AND DEGASSING OF HYDRAULIC FLUIDS ● = M : MINERAL BASED ● = P : PHOSPHATE ESTER BASED

Open the catalog to page 1

FEATURES • Purification of aircraft hydraulic system during maintenance tasks • Different operation modes: • Purification of aircraft hydraulic system, connected to hydraulic test stand and aircraft • Purification of hydraulic test stand • Purification of internal reservoir purifier • Filling and draining of aircraft reservoir • Filling and draining of hydraulic test stand reservoir • Transferring oil from barrel to internal reservoir purifier • • • • Removal of water to less than 100 ppm Removal of 100% free and 95% dissolved gases Integrated heaters to increase dewatering capacity Fluid contamination...

Open the catalog to page 2

A Large touchscreen for easy operation B Emergency button C Connection for condition monitoring with computer

Open the catalog to page 3

TECHNICAL DATA GENERAL Main power supply cable: Hydraulic hose to connect to A/C: HYDRAULIC Maximum inlet flow Internal pump flow 60 USgpm (227 l/min) 15 l/min -M: Mineral based e.g. MIL-H-5606, MIL-H-83282 or MIL-H-87257 -P: Phosphate ester based e.g. Skydrol or Hyjet High flow (3 micron) and low flow (1 micron) filters with electric clogging indicators MEASUREMENT Cleanliness class according to NAS 1638 Water saturation in % Fluid temperature POWER 3 Ph. 380/420 V – 50 Hz, other on request 63 A – 50 Hz Supply Current

Open the catalog to page 4

DIMENSIONS & WEIGHT POSSIBLE OPTIONS Z : Quick disconnect couplings to connect the equipment to the aircraft and hydraulic test stand Other options and accessories are available upon request.

Open the catalog to page 5