Taxiway Reflective MarkerSurface Mounted PRODUCT APPLICATION Taxiway Reflective Markers are used to mark the edges of taxiways and ramps at airports and heliports. They are particularly useful for taxiways with centerline lights that do not have edge lights. FEATURES • The 752.5 tubular surface mount airport marker is an ultra hi-impact channelizer. • Less than 5% breakage after nine months exposure. • The 752.5 has 360 degree visibility. • In case of breakage, the post section is easily replaced without demounting anchor. • The tubular post hinge and inner core have been strengthened to carry the additional weight and stress of the heavier post. • The tubular post is a long-life, color-impregnated, UV stabilized, special polymer extrusion. TECHNICAL SPECIFICATIONS MTBF: Over 75 hits at 55 MPH Height Above Grade: 19 - 36 inches Anchor: Surface Mounted Weight: From 2.25 to 2.5 lb. Colors: Red, White, Blue, Green, Yellow, Orange Sheeting: Reflective. A - 2 3/8” OD extruded tube B - 18” Nylon post with molded on flexible sleeve C - Set of grips D - Surface mount base E - Steel quick release pin ORDERING INFORMATION Order Number: Product # and Height: A751-19 = Reflective marker, 19” A752-24 = Reflective marker, 24” A752.5-30 = Reflective marker, 30” A753-36 = Reflective marker, 36” Mounting Style: SM = Surface mount with quick release pin Reflective Color: B = Blue W = White Y = Yellow O = Orange R = Red G = Green 6830 NW 16th Terrace • Ft. Lauderdale, FL 33309 USA Phone: 1.954.975.2100 • E-mail: [email protected] www.astronics.com/airfieldlighting Reflective Material Height: 14 = 14” descending from the top of post Note: Tube color is white. *Manufactured by Flexstake, Inc. Astronics Actual product specifications may have changed since the printing of this brochure. Brochure specifications are not binding. Confirm current specifications at time of order. Taxiway Reflective Marker Surface Mounted | 111317