Catalogs >
Hughey and Phillips >
Accessory Tools

Accessory Tools
1Pages

Catalog excerpts

/jrjrsASm■MbbOL, TOOLS & ACCESSORIES - 8.1 AIRPORT LIGHTING CABLE END STRIPPER / PENCILLER The Airport Lighting Cable End Stripper / Penciller is used for 0.5 in (12.70 mm) taper cuts of #8, 5KV L-824 Type C airport lighting cable. Setting Fixture is used to set both L-867 & L-868 light bases with 10.25”, 11.25”, 13.25” & 14.25” bolt patterns. Features • WS 49: #8 airport lighting cable. • WS 49H: #4 and #6 airport lighting cable. • Long lasting, guarded cutting blades. • Bushings (.395”, .420”, .445”, .490”) compensate for variation in cable diameter. Ordering Information Description WS 49 WS 49H * Manufactured by Ripley Tools The AW9100 has four legs for stability using T handles to adjust elevation, and the AW9101 uses four crank jacks for elevation adjustment. The center section with the bolt patterns and aiming pointers can be adjusted to rotate TDZ bases 4 degrees as well as can be rotated 90 degrees to accommodate different aiming setups. Ordering Information Description Part Number Setting Fixture with (4) AW9100 T-handles/pipe legs Setting Fixture with (4) AW9101 Trailer Jack legs * Manufactured by Jaquith Industries, Inc. Renewal Parts Description CB 6667, end strip CB 94, pencil CB 94H, pencil #4 and #6 airport lighting cable Product Specifications • Length: 3.5” (89mm) Diameter: 1.5” (38mm) • Weight: 10oz (284g) LEVELING TOOLS Ordering Information Description COMPRESSION CRIMPER WITH DIES The crimper is used for installing copper and aluminum lugs, splices, C-taps and Pigtails 8-2 AWG Cu, 10-6 AWG Al. It has a rotary color-coded die wheel and is equipped with a ratcheting Shure-Stake device (insures positive compression). This crimper has a five-nested die wheel with red, gray, blue brown and green color-keyed lug nests. The ergonomically designed handle delivers comfortable crimping which requires 25% less handle force to complete the crimp cycle than the previous generation tool. L-862 Leveling Tool L-861 Leveling Tool Ordering Information Description Compressor crimper * Manufactured by Thomas & Betts 6830 NW 16th Terrace • Ft. Lauderdale, FL 33309 USA Phone: 1.954.975.2100 • E-mail: DMEairfieldSALES@astronics.com www.astronics.com/airfieldlighting Actual product specifications may have changed since the printing of this brochure. Brochure specifications are not binding. Confirm current specifications at time of order

Open the catalog to page 1