Catalogs >
Hughey and Phillips >
3.1AstronicsDME AC LED REILs 091514

3.1AstronicsDME AC LED REILs 091514
2Pages

Catalog excerpts

LED Runway End Identifier Light (REIL) System ® Voltage-Driven Unidirectional Approach Lighting Approach Lights & Navigational Aids - 3.1 ORDERING INFORMATION Description Part Number REIL System P2-08-0001-002 System Components: Control Cabinet Assembly (CCA) Identifier Unit Assembly (IUA) (2 per system) A3-06-3110-002 Aiming Device A3-06-3111-001 2-inch Frangible Coupling (2 per system) L-849 Style E AC 150/5345-51 (Current Edition) FAA Engineering Brief No. 67 Junction Box Assembly (2 per system) Technical Instruction Manual ETL Certified PATENT PENDING L-849V – Powered by a voltage source Style E – 3-Step intensity levels (low, medium and high) Meets “Buy American.” ICAO: Annex 14, Vol. 1, para 5.3.8 RENEWAL PARTS Description Part Number PWA, IUA, REIL PWA, CONTROL CABINET, REIL PRODUCT APPLICATION The Navigate Series® LED Runway End Identifier Light (REIL) System is a landing aid for pilots to identify the approach end of a runway. The REIL system includes a Control Cabinet Assembly (CCA), two Identifier Units (Flashers), and an Aiming Device. The Identifier Units are installed at each side of the approach end of the runway. The lights are angled to have an effective visual range in clear weather of approximately 3 miles during the day and approximately 20 miles at night. This provides pilots with adequate time to plan and execute a safe approach and landing at night or in reduced visibility conditions. • Long LED life • Three intensity levels • Built-in thermostatic heater • Local, remote and automatic operation • Light weight and state-of-the-art technology IDENTIFIER UNIT ASSEMBLY (Without bracket) LIGHT ENGINE IUA MOUNTING BRACKET ASSEMBLY SCREW, SPARES KIT , SEAL SFR6-32 x 7/16 K2-02-0004-001 (quantity of 20 provided) ENVIRONMENTAL OPERATING CONDITIONS Operating Temperature: -55° C (-67° F) to +70° C (+158° F) Elevation: Sea Level to 10,000 feet (3,048 m) provide for ease of installation • GFI maintenance outlet provided for plug-in test equipment Wind (IUA): Velocity up to 150 knots

Open the catalog to page 1

Approach Lights & Navigational Aids - 3.1 LED Runway End Identifier Light (REIL) System CONTROL CABINET SPECIFICATIONS External Power Requirements: 120/240 VAC/60 Hz or 240 VAC/50 Hz, single phase, 10A Photometric Intensity: High: 15,000 candelas ± 50% Medium: 1,500 candelas ± 50% Low: 300 candelas ± 50% Flash Timing: 120 flashes/minute Coverage: 10º vertical; 30º horizontal Dimensions: 24” x 20” x 6” Weight: 29.2 lbs. Volume: 1.7 cu ft MODES OF OPERATION Local Operation: Through keypad and display Remote Operation: Ground-to-Ground Radio Link; Air-to-Ground Radio Link Automatic Operation:...

Open the catalog to page 2