Tabletop Calibrator TM40

Product catalog summary

Overview:
The TM40 is a modular pressure calibrator designed by HUBER INSTRUMENTE AG. It features a customizable design with four slots for different modules, allowing for tailored configurations to meet specific measurement needs.

Key Features:

Modular design with interchangeable modules.
Capability to generate and measure pressure.
Configurable relay output for various pressure types: absolute, differential, and relative.
Battery operation for up to 8 hours.
Step generator for incremental pressure adjustments.
4.3" resistive touchscreen for real-time data display.
High sampling rate of up to 100 measurements per second.
Easy recalibration process with corresponding modules.

Modules:

Measurement Module (MM40): Covers a range up to 10000 Pa with accuracy up to 0.05% F.S. Symmetrical measurement ranges are possible.
Generator Module (GM40): Generates and regulates pressure autonomously with control accuracy of 0.01 Pa. Requires two slots in the TM40.
Voltage/Current Module (VM40): Coming soon.

Technical Specifications:

Operation via 4.3" resistive touchscreen and incremental shaft encoder.
USB 2.0 VCP interface and Micro SD-Card storage.
Operating temperature range: 15–35 °C, storage temperature: -20–70 °C.
Humidity tolerance: 35–85% RH.
Operating voltage: 12Vdc ±20%, max 500mA.
Dimensions: 390x280x125 mm, weight: 4500g.

Measurement Ranges and Accuracy:

GM40: Ranges from 0 to 10000 Pa with accuracy of 0.1% / 0.05% F.S.
MM40: Ranges from 0 to 7000 Pa with accuracy of 0.1% / 0.05% F.S.

Units of Measurement:
Includes a wide range of units such as mbar, bar, Pa, psi, torr, atm, and more, depending on the measuring range.

Additional Information:

Equipped with temperature-compensated and long-term stable pressure sensors.
Modules include an SCS calibration certificate.

Catalog excerpts

Datasheet TM40 HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Features • Modular design • Generate / measure pressure • Configurable relay output • Absolut-, differential-, relative-pressure • Battery operation • Step generator-> Increase or decrease pressure stepwise (GM40 module) • Measured units switchable during measurement • 4,3” Resistive touchscreen • Up to 100 measurements per second • Easy recalibration process-> (we only need the corresponding module) HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Paige 1 / 4 All rights reserved

Open the catalog to page 1

Datasheet TM40 HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen ...PRESSURE measure very simple... Our modular built Pressure-Calibrator TM40 is unique in its conception. The device is built completely modular. Four slide-in slots are available, to be equipped with different types of modules. Thus allowing the TM40 to be equipped individually, suiting even the most specific needs. Distinguished between three different types of modules, there are: - Measuring module (MM40) - Generator module (GM40) - Voltage / Current module (VM40)-> coming soon! The measurement module covers a freely...

Open the catalog to page 2

Open the catalog to page 3

Datasheet TM40 HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Measurement ranges Measurement accuracy F.S. ± 1 digit Control accuracy _0.10000.00 Pa_0,1% / 0,05%_± 0,1 Pa Other measurement ranges on request. Measurement range from 0.10000.00 Pa are freely selectable. Units of measurement: mbar, bar, Pa, hPa, kPa, MPa, kg/cm2, kg/m2, mmHg, cmHg, mHg, inHg, mmH2O, cmH2O, mH2O, inH2O, ftH2O, psi, lb/in2, lb/ft2, torr, atm (depending on the measuring range) Housing dimensions GM40: 230x65x100 mm (LxWxH) MM40 - Measurement module Measurement ranges Accuracy F.S. ± 1 digit Other...

Open the catalog to page 4

Tabletop Calibrator TM40

Tabletop Calibrator TM40

Catalog excerpts

All Huber Instrumente catalogs and technical brochures