Pressure Calibrator MG20

1 / 3 PagesView full catalog

Pressure Calibrator MG20

Product catalog summary

Specifications

Portable Pressure-Calibrator with easy operation.
Capable of generating over-pressure up to 10 bar and under-pressure up to -800 mbar.
Measuring ranges from -1 to 250 bar.
Features include rugged, compact, and lightweight design, integrated datalogger, infrared interface, and battery operation.
Special constructions available upon request.

Description

The MG20 is a mobile pressure generator equipped with a digital handheld pressure gauge (HM35). It measures relative, differential, or absolute pressure and includes functions like pressure change rate, MIN/MAX, and average value. The device is delivered with an SCS-certificate.

Technical Data

Pressure simulation via handpump and variable volume.
Measurement accuracy varies by range, with resolutions from 0.001 to 0.1 depending on the pressure range.
Compatible with inert gases and instrument air, and media compatible with stainless steel 18/8.
Measurement units include mbar, bar, Pa, kPa, and others.
Temperature calibration and operating range: 0 °C to 50 °C.
Humidity tolerance up to 95% rH.
Communication via serial Infrared (IR) Protocol and SCPI-commands.
Power supply: 3 x 1.5 V battery or 6 VDC power supply unit.
Memory interval selectable from manual to 24h.
Pneumatic connection: hose Ø 4/6 mm NPT 1/8” (from 10 bar).
Case protection type: IP 54.
Dimensions: 158 x 108 x 259 mm; Weight without HM35: 2100 grams.

Catalog excerpts

Datasheet MG20 HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Specifications • Portable Pressure-Calibrator • Easy Operation • Generating Over- and Under- Pressure • Measuring ranges from -1 up to 250 bar • Rugged, Compact, Light • Integrated Datalogger • Infrared Interface (IR) • Average Value • Battery operation • Special Constructions available on request Description The mobile Pressure-Generator MG20 is equiped with our digital handheld pressure gauge HM35. It allows measurements of relative-, differential, or absolute-, pressure. The integrated pressure generator is capable of producing over-pressure up to 10 bar and under-pressure up to -800 mbar. Fine adjusting the pressure is done via integrated variable volume. Ex versions and media-compatible versions are also available. Functions such as pressure change rate, MIN/MAX and average value are available. At delivery, the MG20 comes including an SCS-certificate. HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Paige 1 / 3 All rights reserved

Open the catalog to page 1

Datasheet MG20 HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Technical Data Pressure simulation is done via handpump and variable volume Over-pressure range: Under-pressure range: Measuring range Measuring media: Media compatible rel./abs. inert gases and instrument air all media which are compatible with stainless steel 18/8 (DIN 1.4305) Measurement units: (depending on range) mbar, bar, Pa, kPa, hPa, MPa, kg/cm2, kg/m2, mmHg, cmHg, mHg, inHg, mmH2O, cmH2O, mH2O, inH2O, ftH2O, psi, Ib/in2, lb/ft2, torr, atm Temperature calibration: Operating temperature: serial Infrared (IR)...

Open the catalog to page 2

Open the catalog to page 3

Pressure Calibrator MG20

Pressure Calibrator MG20

Catalog excerpts

All Huber Instrumente catalogs and technical brochures