*myaeroexpo

HUBER Panel

Product catalog summary

Overview: The HUBER Panel is designed for pressure monitoring in clean rooms, offering easy wall mounting and excellent readability. It supports up to four additional sensors for temperature and humidity, with calibration and comparison facilitated by provided software.

Fields of Application: The device is suitable for clean room technology, medical technology, chemical industry, laboratory monitoring, heating, ventilation, and air conditioning.

Technical Specifications:

Measurement Range: -1 to +1 hPa, with other ranges available on request.
Measurement Principle: Inductive.
Overpressure Safety: Max system pressure of 1 bar, with higher protection available on request.
Medium: Non-aggressive gases.
Materials in Contact with Medium: Ni, Al, CuBe, PU.
Linearity: +/- 1% of full value (f.v.), with an option for +/- 0.5% of f.v.
Hysteresis: +/- 0.2% of f.v.; other ranges >= 2.5 hPa.
Supply: 15 - 35 VDC, with an option for 100 - 240 VAC (50 - 60 Hz).
Current Consumption: 6 VA, 500 mAT.
Protection: Zero point max. +/- 0.03%/K, Span max. +/- 0.03%/K.
Resolution: 12 Bit (4096 points).
Temperature Range: Specified range +15°C to +50°C.
Humidity: Up to 80% relative humidity.
Storage Temperature: -10 to +70 °C.
Long Term Stability: +/- 0.5% per annum, typical.
Front Panel: Stainless steel.
Electric Connections: Screw terminal max. 1.5 mm².
Pressure Connectors: Ø 3 x 4mm and Ø 4.6 x 9mm for flexible hoses.
Protection Class: II, with IP20 optional IP65.
Standards: EN 61000-6-1, EN6100-6-2, EN61000-6-3, EN61000-6-4, EN 61010.
Weight: Approximately 1.2 kg (1.3 kg with power adaptor).
Impact Stability: 10g.
Sensor Volume: Approx. 10 ml, with volume increase of approx. 0.2 ml at nominal pressure.
Display: 4x7 segment LED-display with 4 digits, and 4x14 segment LED-display with 2 digits.
Zeroing: Adjustable manually or automatically.
Output: RS485 with Modbus ASCII protocol / Modbus TCP/IP.

Options and Features:

Limit contacts with current consumption of approximately 35/45 mA.
Relay output changer: 6 A / 230 VAC.
Status displayed via 2 LEDs.
Programmable hysteresis, power-on/power-off delay, and switch options.
Warning by flashing the display with set values.

Catalog excerpts

Datasheet HUBER Panel HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen Fields of application: - Clean room technology - Medical technology - Chemical industry - Laboratory monitoring - Heating - Ventilation The HUBER Panel is the ideal device for pressure monitoring in cleaning rooms. Due to it's size, the panel is easily mounted in between walls and convinces with very good readability. Up to four additional sensors for temperature and humidity can be connected to the device and displayed. Calibration and comparison can be done comfortably via the provided software. HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen

Open the catalog to page 1

HUBER INSTRUMENTE AG, Grellingerstrasse 23, CH-4208 Nunningen

Open the catalog to page 2

HUBER Panel

HUBER Panel

Catalog excerpts

All Huber Instrumente catalogs and technical brochures