KOPTRONIK
6Pages

E&SE a Ell Case clamp efficient and flexible Case clamp with "ball screw spindle technology": When something good gets even better -the HOFER KOPTRONIK with touchscreen. This highly developed and practically oriented case clamp is used for the precise angle pressing of units, as well as for drawers, arches, designer furniture, frame joints and more. The pressure wall system is comb interlocked, parallel and at a precise angle to the chamber wall. For this reason, all rightangled pieces can be pressed concentrically, without exhaustive equipment requirements. The press force is built up via...

Operating console Clear arrangement of the operating elements in the control console with touchscreen, maintained-contact button, joystick for 8 movement directions, as well as the emergency stop button. Touchscreen Modes of operation: synchronically, hand, pre-pressing horizontally/ vertically. Data display: • Pressure of the horizontal or the vertical pressure wall - separated from one another •TARGET/ACTUAL pressing time. Input Fields This is where you can enter and change the desired data, depending on the requirements. Error minimisation feature with minimum and maximum...

Synchronised pressing Using an electronically controlled proximity switch, the operating speed is reduced approx. 10 mm before the work piece down to pressing speed. The pressure walls presses the unit synchro-nically with the preset pressure. Angle precision Precise right-angle pressure frames and tightly bound pressure lamella guarantee precisely angled units and the best pressing results. Melamine resin plates These build up a steady counter-pressure, with a wear-resistant, adhesive-repellent and calibrated melamine resin plate (Compact plate), providing a completely sealed surface...

Technical data Standardmodel Pressure force Working dimension max. (Ixhxd) Working dimension min. (Ixhxd) Adjusting speed Pressing speed Working height Total weight - basic machine Connected load Nominal current at 400 V / 50 Hz Space requirements (Ixwxh) KOPTRONIK [mm] with set-up station and pre-assembly table [mm] Special sizes and special equipement on request. Standard equipment • Touchscreen operation • Powered by 4 ball screw spindles • Synchronised pressing via proximity switch • Manual control switch for 8 different movement functions • Independent pressure settings...

Presstechnik HOFER produces and assembles all machine components in their 10.000 m2 state-of-the-art production facilities. Quality from Austria HOFER PRESSTECHNIK GmbH Pramerstrasse 11 4753 Taiskirchen AUSTRIA +43 7764 7351-0 +43 7764 7570 office@hoefer-maschinen.com www.hoefer-maschinen.com