HITACHI Inspire the Next CMI255 & CMI257 Advanced coating thickness on ferrous and non-ferrous metal substrates Find out more These gauges are a great complement to our XRF coatings analysers. To place your order contact [email protected] MORE INFORMATION To find out more about the CMI255 and CMI257 or our range of metal finishing gauges, visit www.hitachi-hightech.com/hha QUALITY ASSURANCE FOR THICKNESS OF PAINT, LACQUER, ZINC AND OTHER PROTECTIVE COATINGS ON METAL SUBSTRATES Two probe configurations designed to fit your measurement needs The CMI255 and CMI257 coating thickness gauges offer dual technology along with high reliability testing of protective and decorative coatings applied to steel, iron, aluminium and other metals. With on-board statistics to review a series of measurements and the ability to account for variations in substrate materials, our CMI255 and CMI257 are superior quality assurance and inspection tools for: | Paint & powder coaters. | Electroplaters. | Galvanizers. | Coating inspectors. | Automotive and aerospace finishers. These compact, handheld gauges are factory calibrated and automatically select the best measurement technique for the base material. The gauges are durably designed, include a rubberized cover and meet IP52 environmental protection standards to withstand use in harsh conditions. The CMI255 features an integrated probe for single-handed operation. The CMI257 features a tethered probe for taking measurements on locations that are more difficult to reach. KEY FEATURES | On-board statistics. | Base re-zero function. | Factory calibrated. | Automatic substrate detection. | Integrated or external probe configuration. | IP52 protection against dust and water. RELIABLE NON-DESTRUCTIVE ANALYSIS We have been providing coating thickness products for the metal finishing industry for over 40 years.

CMI250 SERIES DUAL TECHNOLOGY Magnetic induction technology for non-magnetic coatings (paint, powder coat, zinc, cadmium) over ferrous and magnetic steel. Measurements taken conform to the following specifications: | ASTM D7091. | B499. Eddy current technology for non-conductive coatings (paint, powder coat, epoxy, lacquer) over non-ferrous metals like aluminium, magnesium or copper. Measurements taken conform to the following specifications: | ASTM B244. | B529. | Body dimensions: mm: 110 (L) x 50 (W) x 25 (D). in: 4.3 (L) x 2 (W) x 1 (D). | Probe dimension: mm: 24 x 47. in: 1 x 1.8. | Weight:...