Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. HELILOX Sàrl
  3. HDZ 120
  • Products
  • Catalogs
  • News & Trends
  • Exhibitions

HDZ 120

HDZ 120
1 / 2 PagesView full catalog

HDZ 120

Product catalog summary
Product Overview
The document describes the HDZ 120 - TLOF Light, an omnidirectional marker light designed for TLOF areas of helipads. It can be installed flush with the surface or on mounting brackets, providing optimal illumination with a beam angle of +3° to +30° from the horizontal plane. This ensures long-distance visibility and reduces pilot glare during landing.

Applications
The lights are suitable for marking heliports, FATO and TLOF zones, runways, taxiways, and target points. They are robust enough to withstand aircraft taxiing over them and can be installed in various mounts, either recessed or on raised stands.

Electrical Properties
  • Technology: High power LED
  • Power Supply: D02 (24 - 48VDC), D01 (110 - 230 VAC)
  • Consumption: 12W
  • Intensity Level: PWM Dimmable (30% to 100%)
  • Connectors: M12 - 5 pins connector
  • Lifetime: >100,000 hours

Optical Properties
  • Visible Intensity: Green 617 - 627 nm
  • Infrared Intensity: 850 nm (+/- 30nm)
  • Vertical Aperture: +3° to +30° concentrated
  • Horizontal Aperture: 360°
  • Source Options: Red, Yellow, Green, White, Blue, IR
  • Optical Type: PMMA optical

Mechanical Properties
  • Material: EN AW-6023 (AlSi1Sn1MgBi) & PMMA
  • Weight: 0.43 kg
  • Size: Diameter 120 mm x Height 57 mm
  • Working Temperature: -40°C to +85°C
  • Waterproofing: IP67
  • Chemical Resistance: Resistant to mineral oils, greases, water, and glycols

Compliance Standards
  • ICAO Annex 14 Volume II, Helistation
  • OFAC AD I-012F
  • FAA: AC 150-5390-2B
  • NATO: STANAG 3652
See more

Catalog excerpts

HDZ 120-1

Omnidirectional marker light for the TLOF areas of various helipads. The light can be recessed flush with the surface onto various types of mounting brackets. Its PMMA optics allow the light beams to be focused with an angle of +3° to +30° from the horizontal plane, providing optimal illumination for long-distance visibility or in adverse weather conditions while preventing pilot glare during landing. These lights are ideal for marking heliports and other aviation facilities. They allow for the precise delineation of FATO and TLOF zones, as well as runways, taxiways, and target points. Thanks to their robust construction, aircraft can taxi over the lights without difficulty. The lights can be installed in various types of mounts (available on our website www.helilox.ch)—either recessed or mounted on raised stainless steel stands.

 Open the catalog to page 1
HDZ 120-2

Compliance Standards • ICAO Annexe 14 Volume II , Helis-tation

 Open the catalog to page 2

All HELILOX Sàrl catalogs and technical brochures

  1. LX-PRJ75
    LX-PRJ75

    2  Pages

  2. LX-PRJ35
    LX-PRJ35

    2  Pages

  3. HDZ 150
    HDZ 150

    2  Pages

  4. 110.5001.01
    110.5001.01

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.