VR10-10A
1Pages

I. FLUID MEDIA: WASTE WATER A 2. PRESSURE RATING: PROOF, 972 mbar BURST = 1.303 bar MIN. 3. TEMPERATURE RANGE: OPERATING, I °C TO =+85 °C 4. FLOW RATE = 4.4 L/M AT HEAD OF 200 mm ABOVE THE INLET WITH 0 TO MINUS 0.672 bar AT OUTLET B 5. LEAKAGE: EXTERNALS, INTERNAL = 0 AT 5mbar VACUUM AT OUTLET AND 150mm W.C. HEAD AT INLET 6. MATERIAL: CAP, NUT & ADUUSTER = ALUMINUM ALLOY TYPE I I ANODIZED; SEALS & DIAPHRAGM = NBR; HOUSING, INLET & OUTLET = ULTEM 1000. C ALL INTERNAL PARTS = ACETAL 7. LUBRICATE SEALS WITH PETROL IUM JELLY 8. APPLY APPROPRIATE THREAD LOCKING COMPOUND TO THREADED FASTENERS 9. WEIGHT = 0.40 Kg MAX D 10. MANUAL PULL RING = 10 MM OPENING II. END CONNECTIONS = AS 5131-16 _ II. A BACKFLOW CHECK VALVE IS INCORPORATED IN THE ASSEMBLY OUTLET FITTING. 0 LEAKAGE FROM 5 mbar TO 700 mbar 12. LABEL MARKING: Hebmul ler SRS Techmk E P/N VRI0-I0A (earmarking with seating wax LabeL:-do not remove the split ring and do not turn the adjuster the valve cannot be adjusted MANUAL OPERATION PULL FORCE: 0.46 kg AT 0 DELTA P 22.5 kg AT -0.54 bar OUTLET AND INLET BLOCKED FOR VALVE INSTALLATION PLEASE ATTEND TO DOCUMENT "VR10-I0_10A_MOUNT_INSTRUCTION" THE VALVE IS ABLE TO LET PASS PARTICLES WITH A SIZE OF 2MM MAX. Part-No / DRW-No 200166 VR10-10A REV-E Bearb. Drawn Gepr. CHECK Benennung/TITLE AIR STOP VALVE VR 10- I 0A HEBMULLER SRS TEC Broicherseite 17 41564 Kaarst