Exhibit with us
*myaeroexpo  
English
  1. Catalogs
  2. Hebmüller Aerospace
  3. VC105U-8H

VC105U-8H

VC105U-8H
1 / 2 PagesView full catalog

VC105U-8H

Product catalog summary
Title: Check Valve VC105U-8H - Universal Waste Water Valve
Specifications:
  • Fluid Media: Waste Water
  • Pressure Rating: Operating pressure ranges from +0.32 bar (4.64 PSI) to -0.65 bar (9.42 PSI). Proof pressure is 1.04 bar (15 PSI), with an optional negative proof pressure of -0.975 bar (-14.14 PSI).
  • Temperature: Operating temperature ranges from 1°C to +85°C.
  • Flow Rate: 0.2 liters in 5 minutes with NPO vacuum and 0.1 L/M at -0.65 bar (9.42 PSI).
  • Crack Pressure: Worst case is mounted vertically with the inlet down, less than 2 inches W.C.
  • Weight: Maximum 0.090 kg.
  • Materials: Housing and end made of ULTEM 1000, ball made of polypropylene, retainer made of POM (Acetal, Delrin), and seal made of nitrile or silicone.
  • Label Data: Includes flow or up arrow, Hebmueller SRS, P/N VC105U-8H-yyyy*, S/N _____, and Waste Water Check Valve.
  • End Connections: Fitting ends per AS5131-08.
Procedures:
  • Installation: The valve can be mounted in positions as shown on page 3. The ball has a specific gravity of less than 1.
Standards:
  • Tolerances: According to DIN ISO 2768, middle.
  • Surface: According to DIN ISO 1302.
Document Details:
  • Drawn by: Otterbein on 06.07.2016
  • Checked by: Otterbein on 27.12.2016
  • Company: HEBMÜLLER SRS TECHNIK GmbH, Broicherseite 17, 41564 Kaarst
See more

Catalog excerpts

VC105U-8H-1

1. FLUID MEDIA = WASTE WATER 2. PRESSURE RATING: OPERATING=+0,32bar (4.64PSI PR00F=1,04bar (15PSI) (OPTIONAL NEGATIV PROOF PRESSURE = 4. FLOW RATE=0.2 LITERS IN 5 MINUTES WITH NPO VACUUM AND 0.1L/M AT -0.65 bar (9.42PSI) 5. CRACK PRESSURE: WORST CASE IS MOUNTED VERTICAL WITH THE INLET D0WN=LESS THEN 2 INCHES W.C. 6. INSTALLATION: THE VALVE CAN BE MOUNTED IN POSITIONS AS SHOWN AT PAGE 3. THE BALL HAS A SPECIFIC GRAVITY LESS THEN 1. 8. MATERIALS: HOUSING AND END=ULTEM 1000 BALL=P0LYPR0PYLEN RET AI NER= POM (ACETAL, DELRIN) SEAL=NITRIL OR SILICONE 9. LABEL DATA: 1 FLOW OR 1 UP ARROW AND: HEBMUELLER SRS P/N VC105U-8H-yyyy* * WW = Position of the S/N WASTE WATER CHECK VALVE ALLgeme i ntoL. ToLerances DIN ISO 2768 m itteL/m iddLe Bearb. Drawn Gepr. CHECK Oberfl ache Surface DIN ISO 1302 Werkstoff/MATERIAL: Halbzeug; — [HECK VALVE VE105U-8H Univ. Waste Water VaLve HEBMULLER SRS TECHNIK GmbH Broichersei te 17 41564 Kaarsf

 Open the catalog to page 1
VC105U-8H-2

ALLgeme i ntoL. Tolerances DIN ISO 2768 m i tteL/m i ddLe Bearb. Drawn Gepr. CHECK Werkstoff/MATERIAL: HaLbzeug: — Benennung/T ITLE CHECK VALVE VCI05U-8H U niv. Waste Water Valve HEBMULLER SRS TEC Broicherseite 17 41564 Kaarst K GmbH

 Open the catalog to page 2

All Hebmüller Aerospace catalogs and technical brochures

  1. VC200-6F
    VC200-6F

    1  Page

  2. VC203-08F01
    VC203-08F01

    1  Page

  3. VC2-04NPT
    VC2-04NPT

    1  Page

  4. VC105P-8H
    VC105P-8H

    1  Page

  5. hebvc2-08t01
    hebvc2-08t01

    1  Page

  6. Customer Drawing VC200
    Customer Drawing VC200

    1  Page

  7. hebvc203-08f01
    hebvc203-08f01

    1  Page

  8. hebvc105p-8h
    hebvc105p-8h

    1  Page

  9. VC100-6T
    VC100-6T

    1  Page

  10. VC100-04NPT
    VC100-04NPT

    1  Page

  11. VR10-17
    VR10-17

    1  Page

  12. VR10-3A
    VR10-3A

    1  Page

  13. VR10-10A
    VR10-10A

    1  Page

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.