- Catalogs
- Hartmann Electronic
- D575.00200
D575.00200
D575.00200
- Input voltages range from 90-264 VAC.
- 500W power in a 6U 8HP Euro card package.
- Includes power factor correction (PFC) and supports hot swap and redundancy operation with a current share bus.
- Complies with IEC 61000-3-2 for harmonic correction and EMI standards CISPR EN55032, FCC Class A.
- Features an internal OR-ring diode for N+1 redundancy and is fully compliant with PICMG and CE marking.
- Conformal coated for protection.
- Operating temperature ranges from -30°C to +50°C at full load, derating to 50% at +70°C.
- Storage temperature ranges from -40°C to +85°C.
- Efficiency is typically 75% at 115Vac and 77% at 230Vac.
- Switching frequency is 120K Hz with a transient response of peak transient < 250 mV.
- Safety standards include IEC60950-1 and IEC62368-1, Class I.
- Input voltages are typically 90-264V ac with a power factor of 0.99.
- Input frequency ranges from 47-63Hz with an inrush current ≤ 20 A at 230V ac.
- Output power is typically 500 W continuous with line regulation of 0.1%.
- Features include over current protection (OCP), overload protection (OLP), and remote sensing for VO1, VO2, VO3.
- Quad output configuration with specific pin assignments for DC input and status control.
- Maximum load is the continuous operating load of each rail, but cannot be drawn from all outputs simultaneously.
- Weight is 1.7kgs (3.75 lb).
Note: Specifications are subject to change without notification due to market requests and technological advances.
Catalog excerpts
500W 6U 8HP Euro card package Power factor correction (PFC) Hot swap and redundancy operation with current share bus Meet IEC 61000-3-2 harmonic correction Internal OR-ring diode for N+1 redundancy. EMI meet CISPR EN55032, FCC Class A Fully compliant with PICMG Conformal coated Operating temperature: -30°C to +50°C at full load with specified airflow. Derates linearly to 50% at +70°C Storage temperature: min 800 LFM moving air required to achieve full power 500 W in confined area Power density: Switching frequency: Transient response: Peak transient < 250 mV & returns to within 1% <0.5ms for 50% load-change Safety standard: CPCI format, Eurocard 6U 8HP 160 mm Front panel with extractor handle. NOTE: (1)All measurement are at nominal input, full load and +25°C unless otherwise specifications. (2)Due to requests in market and advances in technology, specifications subject to change without no
Open the catalog to page 1
Electrical Specification Input Specification Input voltages: Power factor correction: Input connector: Input frequency: Inrush current: Input current: Dielectric withstand: Transient protection: EMI: Leakage current: Hold up time: Remote ON/OFF: Power fail signal: Status LED: Thermal protection (OTP): Typ. 90-264V ac. Meet Harmonic correction IEC 61000-3-2. Power factor Typ. 0.99 Positronics 47-Pin PCIH47M400A1 47-63Hz. ≤ 20 A (rms) at 230V ac TYP 5.6A @115Vac, 2.7A@230Vac IEC 60950-1, IEC 62368-1 regulation. MOV withstand transient as specified by IEC 61000-4-4 Level 2. Meet EN 55032/FCC Class...
Open the catalog to page 2
OUTPUT VOLTAGE/CURRENT RATING CHART QUAD OUTPUT Remark: Peal load less than 60 sec. with duty cycle <10%.Maximum load is the continuous operating load of each rail. But Maximum load of each rail can’t be drawn from all the output at the same time. INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT: QUAD OUTPUT DC Input Assignment CNTR & PIN “ ” OVP built in, “@” Adjustable, “#” remote sensing, “≡” 3rd wire load sharing. “ ”סּInstalled with Or-ing diode “▲” Magnetic Amplifier Mechanical Dimensions: mm (Inches) Weight : 1.7kgs (3.75 lb) NOTE: (1)All measurement are at nominal input, full load and +25°C...
Open the catalog to page 3All Hartmann Electronic catalogs and technical brochures
D575.004103 Pages
D575.002513 Pages
D575.003613 Pages
VPX Power Supplies25 Pages