*myaeroexpo

HAM Multi

Product catalog summary

Overview: This document provides detailed technical specifications and configurations for router bit end cutting edge profiles, focusing on the standard type "G". It covers various router bit types, their dimensions, and applications.

Specifications:

End Cutting Edge Profiles: The document describes different profiles such as straight end without cut, fishtail, drill point, and straight end with 5 cutting edges.
Router Types: Discusses multi-routers and spiral routers, with diameters from 0.5 mm to 9.52 mm for multi-routers and 0.3 mm to 3.175 mm for spiral routers.
Materials: Routers are made from solid carbide, known for durability and precision.

Procedures and Recommendations:

Customization: Customers can request different point configurations when ordering.
Applications: Suitable for peripheral and internal contouring of PCBs, including DS and MLB types.
Performance: Highlights high performance, ability to handle higher feed rates, and provide better surface finishes.

Technical Data:

Dimensions: Includes detailed tables with measurements for various router types, such as shank diameter, total length, and cutting edge dimensions.
Design Features: Some routers have diamond cuts and chip breakers for enhanced cutting efficiency and reduced noise.

Conclusion: The document is a comprehensive guide for selecting and customizing router bits for specific applications, ensuring high precision and performance in machining tasks.

Catalog excerpts

Die mechanische Lösung • The mechanical solution Die neue Generation • The new generation HAM 382 SZ Micro Prima HAM 382 AC SZ Micro Prima HAM 382 Micro Prima HAM 382 AC Micro Prima Die mechanische Lösung • The mechanical solution *Gebrauchsmusterschutz *Patent pending Konturen- und Kantenfräser aus Vollhartmetall Solid carbide contour and edge routers Konturen- und Kantenfräser aus Vollhartmetall Solid carbide contour and edge routers Die neue Generation • The new generation HAM 441/443 Multi HAM 445/446 Multi HAM 448/449 Multi Fräser-Stirn-Anschliffarten Standard Typ „G” Router bit end cutting edge profiles Standard type ”G” Diese Anschliffe werden durch die G-Spitze ersetzt. These end cutting edge profiles are replaced by „G” point. Wenn Sie eine andere Stirn-Anschliff-Type wünschen, bitte bei Bestellung angeben. If you require another point configuration, kindly specify it in your order. Fischschwanz Anschliff Drill point Straight end no end cut Straight end 5 cutting edges E-Mail: [email protected] Copyright by A. Maier 10/2007. Nachdruck auch auszugsweise nur mit Genehmigung des Verfassers. Gerade Stirn ohne Anschliff Technische Änderungen unserer Produkte und Änderungen des Lieferprogrammes im Zuge der

Open the catalog to page 1

Die neuen HAM Fräsergenerationen für höchste Ansprüche aus neuesten ultrafeinstkörnigen Hartmetallen (R = Späneförderung rechts, L = links) The new HAM router generations for the highest demands in new ultra micro grain carbides (R = up cut, L = down cut) Standard Konturenfräser zum Fräsen von Außen- und Innenkonturen bei ES-, DS- und ML-Leiterplatten. Standard Konturenfräser zum Fräsen von Außen- und Innenkonturen bei ES-, DS- und ML-Leiterplatten. Vollhartmetall-Konturenfräser, diamantverzahnt Standard routers for peripheral and internal contours. DS and MLB - PCB‘s. Vollhartmetall-Konturenfräser,...

Open the catalog to page 2