Lathe Operator’s Manual
456Pages

Lathe Operator’s Manual Next Generation Control 96-8910 Revision J December 2018 English Original Instructions Haas Automation Inc. 2800 Sturgis Road Oxnard, CA 93030-8933 U.S.A. | HaasCNC.com © 2018 Haas Automation, Inc. All Rights Reserved. Copy by Permission Only. Copyright Strictly Enforced.

© 2018 Haas Automation, Inc. All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the written permission of Haas Automation, Inc. No patent liability is assumed with respect to the use of the information contained herein. Moreover, because Haas Automation strives constantly to improve its high-quality products, the information contained in this manual is subject to change without notice. We have taken every precaution in the...

This product uses Java Technology from Oracle Corporation and we request that you acknowledge that Oracle owns the Java Trademark and all Java related Trademarks and agree to comply with the trademark guidelines at www.oracle.com/us/legal/third-party-trademarks/index.html. Any further distribution of the Java programs (beyond this appliance/machine) is subject to a legally binding End User License Agreement with Oracle. Any use of the commercial features for production purposes requires a separate license from Oracle. ii

LIMITED WARRANTY CERTIFICATE Haas Automation, Inc. Covering Haas Automation, Inc. CNC Equipment Effective September 1, 2010 Haas Automation Inc. (“Haas” or “Manufacturer”) provides a limited warranty on all new mills, turning centers, and rotary machines (collectively, “CNC Machines”) and their components (except those listed below under Limits and Exclusions of Warranty) (“Components”) that are manufactured by Haas and sold by Haas or its authorized distributors as set forth in this Certificate. The warranty set forth in this Certificate is a limited warranty, it is the only warranty by...

Limits and Exclusions of Warranty Components subject to wear during normal use and over time, including, but not limited to, paint, window finish and condition, light bulbs, seals, wipers, gaskets, chip removal system (e.g., augers, chip chutes), belts, filters, door rollers, tool changer fingers, etc., are excluded from this warranty. Manufacturer’s specified maintenance procedures must be adhered to and recorded in order to maintain this warranty. This warranty is void if Manufacturer determines that (i) any Haas Product was subjected to mishandling, misuse, abuse, neglect, accident,...

Customer has accepted the limitations and restrictions set forth in this Certificate, including, but not limited to, the restriction on its right to recover damages, as part of its bargain with Manufacturer or its Authorized Representative. Customer realizes and acknowledges that the price of the Haas Products would be higher if Manufacturer were required to be responsible for damages and claims beyond the scope of this warranty. Entire Agreement This Certificate supersedes any and all other agreements, promises, representations, or warranties, either oral or in writing, between the parties...

Customer Feedback If you have concerns or questions regarding this Operator’s Manual, please contact us on our website, www.HaasCNC.com. Use the “Contact Us” link and send your comments to the Customer Advocate. Join Haas owners online and be a part of the greater CNC community at these sites: haasparts.com Your Source for Genuine Haas Parts www.facebook.com/HaasAutomationInc Haas Automation on Facebook www.twitter.com/Haas_Automation Follow us on Twitter www.linkedin.com/company/haas-automation Haas Automation on LinkedIn www.youtube.com/user/haasautomation Product videos and information...

Dear Haas Customer, Your complete satisfaction and goodwill are of the utmost importance to both Haas Automation, Inc. and the Haas distributor (HFO) where you purchased your equipment. Normally, your HFO will rapidly resolve any concerns you have about your sales transaction or the operation of your equipment. However, if your concerns are not resolved to your complete satisfaction, and you have discussed your concerns with a member of the HFO’s management, the General Manager, or the HFO’s owner directly, please do the following: Contact Haas Automation’s Customer Service Advocate at...

Product: CNC Lathes (Turning Centers)* including all options factory- or field-installed by a certified Haas Factory Outlet (HFO) Manufactured By: Haas Automation, Inc. 2800 Sturgis Road, Oxnard CA 93030 805-278-1800 We declare, in sole responsibility, that the above-listed products, to which this declaration refers, comply with the regulations as outlined in the CE directive for Machining Centers: • Machinery Directive 2006 / 42 / EC • Electromagnetic Compatibility Directive 2014 / 30 / EU • Low Voltage Directive 2014 / 35 / EU • Additional Standards: - CEN 13849-1:2015 RoHS2:...

USA: Haas Automation certifies this machine to be in compliance with the OSHA and ANSI design and manufacturing standards listed below. Operation of this machine will be compliant with the below-listed standards only as long as the owner and operator continue to follow the operation, maintenance, and training requirements of these standards. • OSHA 1910.212 - General Requirements for All Machines • ANSI B11.5-1984 (R1994) Lathes • ANSI B11.19-2003 Performance Criteria for Safeguarding • ANSI B11.22-2002 Safety Requirements for Turning Centers and Automatic Numerically Controlled Turning...

User’s Operator Manual and other Online Resources This manual is the operation and programming manual that applies to all Haas Lathes. An English language version of this manual is supplied to all customers and is marked "Original Instructions". For many other areas of the world, there is a translation of this manual marked "Translation of Original Instructions". This manual contains an unsigned version of the EU required "Declaration Of Conformity". European customers are provided a signed English version of the Declaration of Conformity with Model Name and Serial Number. Besides this...