ImmSec FL Immigration Gate The Gunnebo ImmSec is a specifically designed double gate interlock solution used for the automated validation of travellers at one of the most security sensitive areas in an airport: immigration. The slim and ergonomic design allows the ImmSec to be installed in single or multiple lane configurations, providing an open feel to the traveller without compromising security. The gate automates and accelerates the immigration process whilst ensuring that only one person is permitted per authorised passage. Families and assisted travellers should be processed directly by immigration personnel and travellers with standard cabin luggage are able to be processed automatically by the Immsec. Designed upon a modular chassis platform to provide flexibility in accommodating different data and biometric capture and verification devices which are integrally mounted on the entry to the gate for pre-capture and validation or internally between the secure interlocked gate panels. The Immsec can be equipped with readers for smart ID cards, MRTDs and RFID passports, as well as biometric technology. Gunnebo has employed its robust mechanism philosophy to keep operation and maintenance cost to a minimum and maximise throughput. GunneboFor a safer world

ImmSec Technical Specifications Drive High reliablity DC motor and brake mechanism Materials Casework: 304 grade grained stainless steel and anodised aluminium Moving panels: 10 mm frameless toughened glass Side panels: 10mm toughened glass Function Uni-directional electronic passage control with single person detection and monitoring to facilitate Immigration passport verification processes. Operational Modes Flexibility to integrate modular mounting on end leg and inside kiosk with peripherals and biometric technology. Flexible communications protocol allowing for biometrics to control...

www.gunnebo.com Site Preparation a on l_ 3 3 Please note: this is an example of one possible implementation. Some dimnesions can vary according to requirements. Dimensions which cannot be altered have been marked with B Concrete Base to specification at least (cube) 300N/mm2 of resistance. Base to be flat and level to +/- 5mm over footprint area. GunneboFor a safer world

www.gunnebo.com International Standards CE compliance meeting the following directives: 2006/42/EC Machine Directive 2014/35/EU Low Voltage Directive 2014/30/EU EMC Directive Norms EN 61000-6-3 (2007) Electromagnetic Compatibility - generic standard, emissions EN 61000-6-2 (2007) Electromagnetic Compatibility - generic standard, immunity EN60335-1 (2012) + EN60335-1/A11 (2014) Household and similar electrical appliances. Safety. General requirements EN16005 Power operated pedestrian doorsets - Safety in use - Requirements and test methods Safety system ISO EN13849 performance level C For further...