BoardSec
4Pages

BoardSec Boarding Gate The Gunnebo BoardSec is a specifically designed boarding gate solution used for the validation of passenger boarding passes prior to boarding the plane. systems to update the Airline passenger manifest as the passenger embarks, enabling prompt preparation of Advance Passenger information and profiling. The slim ergonomic design allows the BoardSec to be installed in single or multiple lane configurations neatly adjacent to the traditional boarding desk. The gate is designed to automate and speed up the boarding process for passengers with or without standard cabin luggage. Families and assisted passengers can still be handled in the conventional way by the Airline agents. A standard gate is available with 900mm high moving glass panels together with a detection system preventing unauthorised access but also allowing the passage with luggage. Should higher security levels be required then taller glass panels up to a maximum of 1800mm are available as an option. The passenger interface and gate usage is simple, adopting the common AEA protocol (SBG images) guiding passengers with a common approach across different airports. The BoardSec can be integrated with a range of IATA approved 2D barcode boarding pass readers providing connectivity to the airport IT intfrastructure and CUTE In addition, the gate can also be upgraded with a passport/document reader and biometric capture devices which linked to the boarding pass verification, provide greater security and confirmation that the correct passenger is boarding.

BoardSec Technical Specifications BENEFITS Drive Highly reliable and long lasting brushless DC motor Casework: Moving panels: Side panels: AISI 304-grade grained stainless steel 12mm toughened clear glass 10mm toughened glass infill Operating Modes • Entry - Controlled uni-directional with single person detection • • • Exit - Disembarking option, moving panels fully open with inhibited single person detection to allow free passage off the plane and into the terminal Emergency - Moving panels configurable to be either fully open or locked in closed position. Stacking option - if passengers...

Site Preparation Reader Peripherals Concrete Base to specification at least (cube) 300N/mm² of resistance. Base to be flat and level to +/- 5mm over footprint area.

BoardSec International Standards Norms EN 60335-1 (2002) Safety of Household appliances and special electrical appliances EN 61000-6-3 (2002) Electromagnet compatibility - generic standard, emission EN 61000-6-2 (2002) Electromagnet compatability - generic standard, immunity UL compliance to the standard: UL 325 Door, Drapery, Gate, Louver and Window Operators and Systems For further information please contact: Gunnebo Entrance Control Ltd Tel +44 1825 761 022 Bellbrook Business Park Fax +44 1825 763 835 Uckfield E-mail airport.entrancecontrol@gunnebo.com TN22 1QQ Web www.gunnebo.com United...