DRI - Remote ID for Drone Manufacturers
1Pages

Smallest Module for Direct / Broadcast Remote ID DRI module enables manufacturers to easily integrate direct / broadcast remote identification into new drone models. Compliant with EU & US standards and regulations. Drone Remote Identification New regulations in EU & US regions mandate manufacturers to equip their new drone models with technology for Direct / Broadcast remote identification (RID). DRI is the easiest way to acquire RemoteID technology without years of R&D and product testing. Plug & Play for Pixhawk Cube or Similar You only need one cable to add Remote ID to your aircraft. DRI is compatible with all standard Pixhawk controllers running PX4 or Ardupilot. Plug it into your TELEM port, configure the appropriate baud rate, and you are ready to fly. Not using MAVlink, PX4 or Ardupilot FCs? Having custom firmware? No problem; we can customize our solution to your needs. Sophisticated UART Bypass / Forwarding All your TELEM / serial ports already occupied and you don’t want to mess with the CAN setup and configuration? No worries, we got your back! DRI will not take away any of your existing ports. Thanks to our UART forwarding feature, you can integrate it between the flight controller and your serial peripheral. Just enable port forwarding in our App and connect DRI between your flight controller and serial peripheral. Connect our factory-ready modules to your drone’s flight controller. That’s all it takes. Two Variations Suit Every Application Having tight space inside your aircraft? Or do you just want to enjoy the ease of integration using internal antennas? We produce two variants of DRI; one that comes with a U.FL connector for an external antenna and the second with an internal antenna already on board. If you integrate DRI into carbon fiber aircraft, the U.FL variant will provide the flexibility for best performance. The internal variant will get you all you need for any outside mounting options on plast