Tailor-made for aeromodelers & FPV pilots Bare Minimum for Skilled Drone DIYers Meet the black sheep of the Remote ID family. If you call the whole concept of Remote ID the epic B***S***, our Basic Solution is the perfect solution for you! BS is a no-fluff bare Direct / Broadcast Remote ID minimum for aeromodelers, FPV pilots, and hobbyists to get them RID-ready. Compliant with EU & US standards, FAA approved. This 1-gram device equips your drone with Bluetooth Direct / Broadcast RID. However, its installation requires external antennas, one for Bluetooth and one for GNSS positioning. Plus, a power source because BS comes without any battery. Can you install it on your ultralight FPV drone? Or a custom-built beauty? If yes, go for BS and get compliant in no time! BS is so flexible that you can use it regardless of which drone you use. Drone RID for FPV, models & hobby planes Pretty upset about Remote ID requirements for recreational pilots? We get it. New rules in EU & US regions force Direct / Broadcast Remote Identification (RID) to nearly all pilots. BS is here for aeromodelers, FPV pilots and recreational pilots, making their drones compliant without sacrificing limited payload or losing hobby. If you own DJI or any other branded off-the-shelf drone with sealed-off hardware, the better option for you is Beacon. You can easily stick it on the drone without pulling out any wires. Beacon is a fully independent device that comes with a built-in battery, accelerometer, antennas and many other features. What is more, you can quickly swap it between all your drones! Affordable & Standalone RID Device All It Takes to Become RID-Compliant BS has everything to get you compliant. On your journey to get done with this BS for the least amount of bucks, you might notice we offer an even cheaper RID module. Right? Our DRI Module is a highly specialized component for drone manufacturers that are required to produce Standard Remote ID drones. While BS works as an independent device with its own GPS receiver, the DRI module fully relies on sensor information provided by the flight controller. First thing first. BS weighs 1.3 grams (0.046 oz), including antennas, so your aircraft should be able to handle this extra payload. Next, you need U.FL compatible antennas, 2.4 GHz for Bluetooth and 1.575 GHz for GNSS. And lastly, power it up with a 3 or 4-pin power input cable (3.3V-17V). BS is equipped with flash memory to store a few hours of flight data for later export and a supercapacitor to maintain a GPS fix for 7 minutes in case you need to power-cycle your aircraft. Looking for Betaflight controller integration? Or operation as a telemetry module for Futaba or Spektrum? Our App is a complementary free-to-use App where users can manage their drones and Remote ID devices. It comes with additional features such as airspace zones, flight plans, nearby drone scanning, and notifications about any airspace hazards.