Exhaust Gas Temperature Probes
8Pages

Engine Monitors & Sensors Exhaust Gas Temperature Probes Our simplest and most popular type of EGT EGT-HCS-01 probe. Uses a hose-style clamp to secure probe EGT Probe, Small to exhaust stack. Small probe fits exhaust pipes from 1-2” diameter. Uses a hose-style clamp to secure probe to EGT-HC-01 exhaust stack. Large probe fits exhaust pipes EGT Probe, Large from 1.5-2.5” diameter. 8 mm compression-style EGT probe. Includes compression fitting. Long-life EGT probe. 5-year warranty vs. 2-year warranty for the standard probes. Withstands higher temperatures. Fits exhaust pipes 1-2” in diameter. EGT probe extension wire. Usually required for aircraft with pusher-type engine installations. Sold by the foot. Prices current as of 8/16/2013. Subject to change without noti

Cylinder Head Temperature Probes CHT-BAY-01 CHT Probe, Bayonet Style Bayonet-style CHT probe. Used mostly with Lycoming and Continental engines. $39 NOTE: Requires one (1) threaded probe adapter per probe (CHT-ADP-01). Threaded adapter for bayonet-style CHT probes. Ring style CHT probe with 4 mm ring. Suitable for some Rotax installations. Ring style CHT probe with 10 mm ring. Installs under the spark plug. Suitable for Rotax 912/914. Ring style CHT probe with 12 mm ring. Installs under the spark plug. Suitable for Jabiru engines. Ring style CHT probe with 14 mm ring. Installs under the...

Electrical System CS-01 Current Sensor Current Sensor, +/- 100 AMP. Suitable for aircraft with 60 amp alternators. Current Sensor, +/- 50 AMP. Suitable for aircraft with Rotax, Jabiru and other engines with light duty charging systems. REG/RECT-01 Tympanium regulator/rectifier. 3-phase or singleRegulator/Rectifier phase, no load required. Weighs approx. 1 lb. Manifold Pressure Sensors MAP-01 Manifold Pressure Sensor Manifold pressure sensor, 0-31 in. Hg. For normally-aspirated engines. MAP-02 Manifold Pressure Sensor Manifold pressure sensor, 0-51 in. Hg. For turbocharged engines.

Temperature/Pressure Probes HPS-01 Pressure Sender Oil/coolant pressure sender, 0-150 psi Oil/coolant pressure sender, 0-80 psi LPS-02 Coolant pressure sender Fluid temperature probe - 1/8-27 threads Oil temperature probe for Lycoming and Continental White plastic coated Outside Air Temperature probe. Wire to either EIS or EFIS. Machined aluminum Outside Air Temperature probe. Wire to either EIS or EFIS. (Included with EFIS system.)

Fuel System FF-EI FT-60 Fuel Flow Popular “Red Cube” fuel flow package for EIS. 0.1 gallon resolution. Requires factory-installed fuel flow software package for EIS. Sender only– $250 Software Upgrade Only– $250 LPS-02 Fuel Pressure Sender 0-28 psi fuel pressure sender. Recommended for carbureted engines. HPS-SS-01 Stainless Fuel Pressure Probe 0-100 psi fuel pressure sender. Recommended for fuel injected engines. CARB-01 Carburetor Temperature Probe Program your EIS to warn you when your carburetor temperature is right for icing. Machined brass probe works with most carburetors except...

GRAND RAPIDS TECHNOLOGIES Description Part Number Price Lyc/Cont. 4-cylinder Basic (4 bayonet CHT, 4 EGT, OT, OP) EIS-4K-LYC-BAS-PKG $1,070 Lyc/Cont. 4-cylinder Advanced (Basic + FF, FP, 0-31 in. MAP, 100-amp CS) EIS-4K-LYC-ADV-PKG $1,600 Lyc/Cont 4-cyl Advanced LL (Advanced w/ Long-Life EGT & FP, 0-51 in. MAP) EIS-4K-LYC-ADVLL-PKG $1,695 Lyc/Cont. 6-cylinder Basic (6 bayonet CHT, 6 EGT, OT, OP) EIS-6K-LYC-BAS-PKG $1,265 Lyc/Cont. 6-cylinder Advanced (Basic + FF, FP, 0-31 in. MAP, 100-amp CS) EIS-6K-LYC-ADV-PKG $1,795 Lyc/Cont 6-cyl Advanced LL (Advanced w/ Long-Life...

EIS Engine Monitor Instruments- A la Carte and Options Instrument price only, no harnesses, connectors or probes included. Basic monitoring for two-stroke engines Basic monitoring for four-stroke engines. 2 EGT/CHT, 2 Aux inputs Full engine monitoring for four cylinders. Full engine monitoring for six cylinders. Engine monitoring for 9 cylinders. Note: Only 12 EGT/CHT inputs are possible. We recommend monitoring 9 EGT and 3 CHT. CAB-25A-01 Cable A for M4000 or M6000; main harness CAB-25B-4000-01 Cable B for M4000; EGT/CHT harness CAB-25B-6000-01 Cable B for M6000; EGT/CHT harness CNC...

Engine Monitors & Sensors Order Form GRT GRAND RAPIDS TECHNOLOGIES Bill To: Same as Ship To Payment Info Credit Card Expiration CCV We accept VISA and MasterCard. Signature:_ Check or money order enclosed Amount: Customer Contact Info Phone Email Please Add $12 for domestic USPS shipping. Michigan residents please add 6% sales tax. , A 2.5% discount applies to merchandise total when paid by check. This discount does not apply to shipping charges. Please print all applicable pages and send with your check, money order or credit card number to: Grand Rapids Technologies 3133 Madison...