T58
5Pages

Product Description Greenray Industries' T58 Series TCXO has been developed as a reference oscillator for timing applications requiring very low g-Sensitivity performance and tight temperature stability. Frequency Range: 10 to 52MHz g-Sensitivity to <3 x 10-10/g Shock to 30,000g Temperature Stability to ±50 ppb (−40 to +85°C) Rugged 5.0 x 3.2mm package Low g-Sensitivity and Tight Stability in a compact, SMT package Telecommunications High-shock electronics Mobile radio Mobile instrumentation Airborne communications Wireless communications Microwave receivers Telecom St

Electrical Characteristics Parameter Nominal Frequency Frequency Stability (other stability available, please contact factory) Electrical Characteristics Min Typical Acceleration Sensitivity Worst axis tested @ 90 Hz, 10 g After 24 hrs recovery Voltage Control VC=0 to Supply, Positive Slope Phase Noise Performance Typical Min Ordering Code Supply Current Parameter CMOS Load Ordering Code Load Level Ordering Code CMOS Clipped Sinewave Symmetry Clipped Sine Supply Voltage Floor Parameter

Environmental and Mechanical Specifications Screening Vibration Shock Screenings Method, Condition Description Ordering Code 20 g, 20 Hz to 2000 Hz, swept sine Customer Requirements Output CS: Clipped Sine C: CMOS G-Sensitivity SD: STD LG: Low G UL: Ultra-Low G HG: Customer Specific HG Shock Blank: STD HG: Customer Req. E Termination Finish E: Au Plated (ROHS) STD PB: 63Sn37Pb (non-ROHS) LF: 96.5Sn3.5Ag Typical Phase Noise Output C: CMOS S: Clipped Sine Input Voltage Term. Finish E: Au, <10uin LF: Sn, 100% PB: SnPb,

Package Information CONTROL VOLTAGE NC NC GROUND OUTPUT TRISTATE OR NC, SEE TABLE 1 NC SUPPLY VOLTAGE (NC Pads may have internal Connections and should be Isolated) TRISTATE FUNCTION PAD 6 HIGH (SUPPLY) OPEN (NC) LOW (GND) Preliminary Specification ENABLE/DISABLE FUNCTION OUTPUT ENABLED OUTPUT ENABLED HIGH IMPEDANCE DISABLED The specifications on this datasheet pertain to a product which is under engineering development. Contact the factory to determine the current availability.

Recommended Configuration Recommended Solder Reflow Profile