RADIO TIMING GTC rack

Product catalog summary

Internal Time Base
The master clock features a microprocessor quartz time base with a frequency of 3.6864 MHz, which is radiosynchronizable. It maintains an accuracy of +/- 0.1 seconds per 24 hours within a temperature range of 20°C to 30°C.

Security Features
The device includes a lithium battery backup that preserves timekeeping and programming for up to 10 years during power failures. It also memorizes impulses and rapidly synchronizes slave clocks when power is restored. Additionally, it has a protection filter against overvoltage and industrial interferences.

Specifications

Power Supply: 230 VAC/50-60Hz or 115 VAC/50-60Hz
Certifications: CE, EN 60950, EN 55022, EN 55024
Maximum Consumption: 45VA
IP Rating: IP 31
MTBF: 100,000 hours
MTTR: Motherboard - 10 min, Display board - 5 min, Output board - 5 min
Weight: 2.6 kg max
Dimensions: L482 x H266 x D44 mm
Display: LCD graphics with 4 lines of 20 backlit characters
Operating Temperature: -10°C to 50°C
Storage Temperature: -20°C to 70°C

Key Features

Displays date and time on an LCD screen
Compact design with easy programming via front panel keyboard
Backup of timekeeping and program for up to 10 years with lithium battery
Program retention ensured by flash memory storage

Synchronization Inputs

DCF (Europe)
France Inter (Europe)
GPS without external power supply up to 100m on a single pair tel cable (via a GPS/DCF converter)
AFNOR NFS87500 (IRIG B)
ASCII RS232
ASCII RS422/485

Synchronization Outputs

Default parallel reversed pulsed minute 24V/1A or ½ serial minute (can drive up to 140 units of GORGY TIMING clocks)
AFNOR NFS 87500/IRIG B 1000Hz Time code output with millisecond accuracy (can drive up to 250 units of GORGY TIMING clocks)
ASCII RS422/485
ASCII RS232

Programmer Units
The built-in weekly programmer can be used for annual event schedules such as national holidays and school vacations. It operates on Timing or ON/OFF mode and includes:

Programming by keyboard on the front face
3 independent relays, voltage-free output, breaking capacity 250 volts 10 A
1 pre-wired 230-volt output relay, 10A breaking capacity
Option for 2 additional dry-contact relays

Additional Features

Master clock with built-in programmer unit and impulse output
Automatic and programmable Daylight Saving Time
Automatic time setting when switched on

Configuration Options
The equipment can be configured and programmed in the factory according to customer specifications, with options for additional dry contact relays and tropicalization of the electronic board.

Catalog excerpts

GORGY Q TIMING LA MARQUE DU TEMPS Master clock with built-in programmer unit and impulse output (either 1A/24V parallel minute impulse or half- minute serial reversed pulse). Automatic and programmable Daylight Saving Time. Automatic time setting when switched on. Internal time base Key features Microprocessor quartz time base, Radiosynchronisable: 3.6864 MHz • Accuracy : +/- 0.1 sec/24 hours between 20°C to + 30°C. • Synchronization outputs Programmeur units Security • In case of power failure, back up of Time keeping and Program for up to 10 years ensured by lithium battery. • Memorization of impulses and rapid synchronization of slave clocks when power is on. • Protection filter against over voltage and industrial interferences. D i sp I ay of d ate a n d t i m e on LCD screen. Compact Product . Easy programming via front panel keyboard. back up of Time keeping and Program for up to 10 years ensured by lithium battery. Program retaining ensured by flash memory storage. nchronization inputs DCF (Europe). France Inter (Europe). GPS without external power supply up to 100m on a single pair tel cable (via a GPS/DCF converter). AFNOR NFS87500 (IRIG B). ASCII RS232. ASCII RS422/485. • Default parallel reversed pulsed minute 24V/1A or V2 serial minute. (can drive up to 140 units of GORGY TIMING clocks.) • AFNOR NFS 87500/IRIG B 1000Hz Time code output. Millisecond accuracy. (can drive up to 250 units of GORGY TIMING clocks.) • ASCII RS422/485. • ASCII RS232. Built-in weekly programmer can also be used for annual events schedules such as: national holidays and school vacations. It operates on Timing or ON/OFF mode. • Programming by keyboard on front face. • 3 independent relays, voltage-free output, breaking capacity 250 volts 10 A. • 1 pre-wired 230-volt output relay, 10A breaking capacity. • Option: 2 additional dry-contact relays. Bee Made in France Ref : BDR_UK1 -8_Master-clock-Time-servers-Software-priceless-V7.0 All technical changes, aesthetic, colour can be made without notice.

Open the catalog to page 1

GORGY Q TIMING LA MARQUE DU TEMPS OPTION : CONFIGURATION Programming of relays and synchronization outputs. Net Price HT : Ability to configure and program the equipment in the factory according to the customer information. In that case, add an extra line in the order. Ref : BDR_UK1 -8_Master-clock-Time-servers-Software-priceless-V7.0 All technical changes, aesthetic, colour can be made without prior notice.

Open the catalog to page 2

RADIO TIMING GTC rack

RADIO TIMING GTC rack

Catalog excerpts

All GORGY TIMING catalogs and technical brochures