emil
emil
Emil is a comprehensive suite designed for the inspection of navaids, specifically ILS and VOR systems, using both ground-based and UAS-based methods. It aims to automate and enhance the efficiency of navaids inspections, reducing costs and improving repeatability.
- ILS Localizer: Course alignment, course structure and displacement sensitivity, off-course clearance.
- ILS Glideslope: Glidepath alignment, course structure and displacement sensitivity.
- VOR: Sensing and pattern accuracy for radial and orbit alignment.
Emil complies with ICAO Document 8071 and Annex 10 Volume I, suitable for CAT I-II-III runway inspections.
Utilizes multi-frequency multi-constellation RTK for sub-decimetre precision. Supports both ground-based platforms (mid-size van or trailer) and UAS-based platforms (compatible with DJI and other UAVs).
Includes Rohde&Schwarz EVSG1000, EVSF1000, and EVSD1000 analyzers. DDM measurement uncertainty is ≤ 0.25% for localizer and ≤ 0.5% for glidepath.
Emil offers a unified tool for both ground and UAS inspections, reducing maintenance costs and inspection time. It ensures repeatability, real-time data streaming, and automatic report generation.
- Cost reduction and extended revisit times for inspections.
- Repeatable measurements for maintenance.
- Minimized impact on airport operations.
- Real-time visualization and automated reporting.
- High measurement density and precise positioning.
- Flexibility in UAS-based inspections.
- Ground-based: Includes a rack with ILS/VOR analyzer, GNSS receiver, cellular router, and masts for inspections.
- UAS-based: Features a UAS with onboard ILS/VOR analyzer and GNSS receiver, compatible with DJI Matrice M350.
Emil is used by 4 ANSPs and has inspected 40 navaids, demonstrating its effectiveness and reliability.
Emil software generates detailed reports for localizer, glidepath, and VOR inspections, covering signal modulation, carrier frequency, and alignment metrics.
Catalog excerpts
Data sheet - Course alignment. - Course structure and displacement sensitivity. - Off-course clearance. - Glidepath alignment. - Course structure and displacement - Sensing and pattern accuracy for radial alignment. - Sensing and pattern accuracy for orbit alignment. Emil A complete suite For navaids inspection Advanced ground-and UAS-based ILS/VOR inspection Ground- and UAS-inspection with one single analysis and visualization tool: Emil software. Reduction of maintenance costs thanks to less time required for inspection. Benefits Repeatability of the inspection results. Report generated automatically after the inspection campaign. Data recording and real-time streaming. Product info website at:
Open the catalog to page 1
Emil is a product to enable cost-efficient, automated and repeatable ground-based and UAS-based ILS and VOR navaids inspections. Emil is a complete suite of hardware and software to facilitate and automatize the inspection of navaids. Emil extends the traditional ground-based capabilities by providing an UAS-based ILS/VOR inspection solution. ■ Reduction of ground inspection costs and larger revisit times of flight inspection campaigns. ■ Repeatability of the measurements along different inspection campaigns, which enables preventive and corrective maintenance. ■ Faster inspections, minimizing...
Open the catalog to page 2
