User-guide-Plug-play-base-Airlink-3085IA

Product catalog summary

Product Overview
The Globalsys Airlink 3085IA is a plug & play base designed for wireless communication between vehicles and ground teams or solely between ground teams. It supports up to 8 wireless headsets or mobile devices and is compatible with various vehicles including helicopters, ships, and aircraft.

Specifications

Radio: Frequency range of 1870 - 1930 MHz, transmit power of 200mW, GFSK modulation, and a range of up to 300 meters.
Audio: Bandwidth of 200 Hz to 7 kHz, distortion less than 3%, and a signal-to-noise ratio of 40 dB ± 2 dB.
Battery: Li-ion 2600 mAh with a life of up to 16 hours and a charging time of 3 hours.
Dimensions and Weight: 128x61x38mm, 300g.
Environment: Operating temperature from -20°C to +60°C, charging temperature from 0 to +45°C, IP54 protection level, and drop resistance of about 1 meter.

Audio Adaptation
The base can connect to various intercom systems through vehicle-specific adapter cords. It includes a coiled cable extendable up to 2.5 meters. Color codes for audio adaptation are provided for different impedance levels.

Guidelines and Maintenance

Regular inspections are recommended to detect any damage.
Ensure the audio-electric input device functions properly before use.
Store the device in a dry, clean place at room temperature, away from direct sunlight.
Clean with mild soap and water only, avoiding harsh chemicals.

Operation

Turn the unit on or off by pressing the ON/OFF button for 3 seconds.
Pairing is required only the first time; press the ON/OFF button twice on each device to initiate pairing.
Battery can be charged via USB-C cable or rack charger, with LED indicators showing charging status.

Contact Information
For more information, visit global-sys.com or contact Globalsys at their office in Bonneuil-Sur-Marne, France.

Catalog excerpts

User-guide-Plug-play-base-Airlink-3085IA-2

• Full duplex audio wideband • Up to 8 portables devices can communicate with the base • Removable battery pack • Qualified for Europe, US, Brazi, Japan, Taiwan • Compatible to all vehicles (helicopters, ships, aircraft) Frequency range : Transmit power : Modulation : Speech encoding : Number of channels 1870 - 1930 MHz (adjusted according to local regulation) 200mW (23 dBm). GFSK 1.152 Mbaud Up to 300 meters ADPCM (Adaptative Differential Pulse Code Modulation) 120 Signal to noise ratio : Using temperature : Charging temperature : IP protection level : On-concrete drop : Battery type: Battery...

Open the catalog to page 2

User-guide-Plug-play-base-Airlink-3085IA-3

Depending upon environment (obstacles...) the range is up to 300 meters (line of sight). Precautions are to be taken when placing the plug&play base, the station remains as much as possible in sight of users to achieve optimal performance. The base can be connected to a wide range of Intercom System through the "headset" interface of the vehicle via adapter cords specific to the vehicle considered. The different levels / impedances are indicated in the table below: Low level/High impedance Low level/Low impedance High level/High impedance 850 pV max RMS (Root Mean Square) / 75 0

Open the catalog to page 3

User-guide-Plug-play-base-Airlink-3085IA-4

Guidelines Adjustments and maintenance should be done according to manufacturer instructions. The Airlink 3085IA plug&play base can deteriorate with use, it is therefore advised to inspect them at regular intervals in order to detect any cracks or leaks, for example . The Airlink 3085IA plug&play base is equipped with an audio-electric input device. The user should verify that it works properly before using it. If the user notices a distortion or a defect, he/she should refer to the manufacturer's instructions. Product description The Globalsys Airlink 3085IA plug&play base is designed to create...

Open the catalog to page 4

User-guide-Plug-play-base-Airlink-3085IA-5

Overview Airlink 3085IA plug&play base ON/OFF “STATUS” Cockpit isolation “STATUS”

Open the catalog to page 5

User-guide-Plug-play-base-Airlink-3085IA-6

Battery autonomy Battery autonomy Battery > 50 % Battery < 50 % Battery < 10 % Press ON/OFF button during 3s to turn ON or OFF the unit. Wired charge You can charge the battery with a USB-C cable. Battery can be charged through a USB-C cable or a rack charger. Flashing : no communication Static : communication is established Remove battery Press the two sides buttons to remove battery and slide. LED red : battery is charging LED off : battery charged Pairing (only first time) Wait 10s after power on the devices to ensure units are not already paired (devices are already connected if LEDs do not...

Open the catalog to page 6