User guide base Airlink 2085

Product catalog summary

Product Overview:
The Globalsys Airlink 2085 is an aircraft base designed for wireless communication between an aircraft's flight deck and ground teams using communication headsets. It supports up to four portable devices and is compatible with all aircraft.

Specifications:

Radio: Frequency range of 1870 - 1930 MHz, transmit power of 23 dBm (EU) and 21 dBm (US/JPN), receive sensitivity between -93 to -89 dBm, GFSK modulation, and a range of up to 300 meters.
Audio: Bandwidth of 150 Hz to 6500 Hz, base station input of 2.5V to 5.5V, and output of 250 mV.
Battery: 2350mAh 3.7V Li-Ion with up to 20 hours of life.
Dimensions and Weight: 128x61x38mm, 300g.
Environmental Conditions: Operating temperature from -20°C to +60°C, charging temperature from 0 to +45°C, IP64 protection level, and drop resistance of about 2 meters.

System Structure and Guidelines:
The system includes an "ON/OFF" button, "STATUS" indicator, LED charging, USB-C charger, removable battery, and protective bumper. Adjustments and maintenance should follow manufacturer instructions, with regular inspections for wear and tear.

Usage Instructions:

To turn the unit on or off, press the ON/OFF button for 3 seconds.
For pairing, ensure devices are not already connected. If not, press the ON/OFF button twice on each device to establish communication.
Battery can be charged via USB-C cable or rack charger.

Maintenance and Storage:
Keep the aircraft base dry and clean, store at normal room temperature, and avoid direct sunlight. Clean with mild soap and water only, and avoid exposure to extreme weather conditions.

Contact Information:
Globalsys, 2b, avenue des coquelicots, 94380, Bonneuil-Sur-Marne. Phone: +331 43 99 42 17, Email: [email protected], Website: global-sys.com

Catalog excerpts

Characteristics Full duplex audio wideband Up to 4 portables devices can communicate with the aircraft station Removable battery pack Qualified for Europe, US, Brazi, Japan, Taïwan Compatible to all aircraft Radio Frequency range : Transmit power : Receive sensitivity : Modulation : Modulation depth : Range : 1870 - 1930 MHz (adjusted according to local regulation) EU:23 dBm; US/JPN:21dBm -93 -92 -89 dBm GFSK 1.152 Mbaud DECT GFSK bandwidth = 20 dB < 1,728 MHz Up to 300 meters Audio Bandwidth : Base station input : Base Station output : Environment Using temperature : -20°C to +60°C Charging...

Open the catalog to page 2

Guidelines Adjustments and maintenance should be done according to manufacturer instructions. Aircraft station can deteriorate with use, it is therefore advised to inspect them at regular intervals in order to detect any cracks or leaks, for example . This aircraft station is equipped with an audio-electric input device. The user should verify that it works properly before using it. If the user notices a distortion or a defect, he/she should refer to the manufacturer's instructions. Product description The Globalsys Airlink 2085 aircraft base is designed to create wireless communication between...

Open the catalog to page 3

Overview Airlink 2085 aircraft base Protective bumper “STATUS” indicator Bottom view Removable battery USB-C charger

Open the catalog to page 4

Battery autonomy Battery > 50 % Battery < 50 % Battery < 10 % Press ON/OFF button during 3s to turn ON or OFF the unit. Battery can be charged through a USB-C cable or a rack charger. Remove battery 1. Remove the protective bumper from the aircraft station 2. Press the two lockers and slide the battery. Static : no communication Flashing : communication is established Battery charge Led red : battery is charging Led off : battery charged Pairing (only first time) Wait 10s after power on the devices to ensure units are not already paired (devices are already connected if LEDs flash on both unit)...

Open the catalog to page 5