Overview: The LandMarkTM 60 INS/GPS is a high-performance, non-ITAR commercial MEMS GPS-aided inertial navigation system (INS) with CAN BUS and RTK input capabilities. It is designed for applications requiring precise navigation and stabilization, such as platform stabilization, antenna pointing, and automotive testing.

Key Specifications:

• GNSS Capabilities: Supports 72 channels including GPS, GLONASS, BeiDou, QZSS, and SBAS (Galileo ready). SBAS includes WAAS, EGNOS, and MSAS.
• Navigation Update Rate: Up to 18 Hz.
• Accuracy: GPS velocity accuracy is 0.05 m/s, heading accuracy is 0.3 degrees, and horizontal accuracy is ±2.0m CEP with SBAS.
• Inertial Performance: Ultra-low noise gyros at 0.0016°/sec/√Hz and low noise accelerometers at 0.05mg/√Hz. In-run gyro bias is 3°/hour 1σ.
• Environmental Tolerance: Fully compensated bias and scale factor over temperatures ranging from -40°C to +85°C.
• Physical Characteristics: Weighs less than 160 grams and has a volume of 113 cm³ (6.88 in³).
• Power Requirements: Operates on an input voltage of +7V to 36V with typical power consumption under 0.9 W.

Applications: The system is suitable for a variety of applications including platform stabilization, antenna stabilization and pointing, EO/IR stabilization, railway motion monitoring, navigation, flight control, automotive testing, and laboratory use.

Export Classification: Classified under Commerce ECCN7A994 (NLR).

Additional Features: The system includes SDK for attitude indicator display and data display & recording software.