LandMark TM 005 IMU

LandMark TM 005 IMU

LandMark TM 005 IMU

Product catalog summary
Overview: The LandMarkTM 005 IMU is an ultra-small, high-performance inertial measurement unit (IMU) with a compact size of 0.6 inches. It is designed for applications requiring precise motion sensing and stabilization.
Specifications:
  • Non-ITAR MEMS IMU with a cube size of 0.6 inches.
  • Performance range includes up to 490°/sec for gyroscopes and 15g for accelerometers.
  • Low gyro noise at less than 0.0028°/sec/√Hz and low accelerometer noise at less than 0.075mg/√Hz.
  • Wide sensor bandwidth of 250 Hz.
  • Gyro bias in-run is 5°/hour with a 1σ standard deviation.
  • Temperature bias stability is less than 0.1°/sec 1σ.
  • Compensated misalignment is less than 0.5 mrad 1σ.
  • G-sensitivity is less than 0.001°/sec/g 1σ.
  • Full temperature calibration for bias and scale factor.
  • Vibration tolerance up to 8grms and shock resistance up to 600g.
  • Lightweight at less than 18 grams and ultra-low power consumption under 200 mW.
  • Output data rate is selectable up to 5 kHz, with external synchronization up to 8 kHz.
Applications: The IMU is suitable for platform stabilization, antenna stabilization and pointing, EO/IR stabilization, LIDAR stabilization, low-cost navigation, and flight testing.
Export Classification: The product is classified under Commerce ECCN7A994 (NLR).
Additional Information: Specifications are subject to change without notice. The document revision is dated 18Mar07, with serial number 500.
See more

Catalog excerpts

LandMark TM 005 IMU-1

Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS G PS/AH RS INS/GPS NON-ITAR MEMS IMU Smallest (0.6" cube) IMU in its Performance Up to 490°/sec & 15g Range Low Gyro Noise <. 0.0028°/sec/VHz Low Accel Noise < 0.075mg/VHz Wide Sensor Bandwidth 250 Hz Gyro Bias In-Run 5°/hour 1a Bias Over Temperature < 0.1°/sec 1a Compensated Misalignment <0.5 mrad 1a G-Sensitivity <. 0.001°/sec/g 1a Full Temperature Calibration (Bias & SF) Vibration 8grms Shock Resistant 600g Light Weight <18 grams Ultra Low Power < 200 mW typical Output Data Rate up to 5 kHz (selectable) External Sync up to 8 kHz (selectable) Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: +1.425.396.0829 Fax: +1.425.396.1129 [email protected] www.gladiatortechnologies.com

 Open the catalog to page 1
LandMark TM 005 IMU-2

Axes (Top View) Right Hand Rule Specification PARAMETER Specification subject to change without notice

 Open the catalog to page 2

All Gladiator Technologies catalogs and technical brochures

  1. MRM60 IMU

    2  Pages

  2. DIGS™100

    2  Pages

  3. MEMS A40

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.