LandMark™60 INS/GPS

Product catalog summary

Overview: The LandMarkTM 60 INS/GPS is a high-performance, non-ITAR commercial MEMS GPS-aided inertial navigation system designed for various applications including platform stabilization, antenna pointing, and navigation. It features a CAN BUS and RTK input, supporting multiple GNSS systems such as GPS, GLONASS, BeiDou, and QZSS, with SBAS support for WAAS, EGNOS, and MSAS.

Specifications:

GNSS Capabilities: 72-channel receiver supporting GPS, GLONASS, BeiDou, QZSS, and SBAS. Galileo readiness is noted.
Performance: Offers up to 18 Hz navigation update rate, GPS velocity accuracy of 0.05 m/s, and heading accuracy of 0.3 degrees. Horizontal accuracy is ±2.0m CEP with SBAS.
Inertial Performance: Features ultra-low noise gyros (0.0016°/sec/√Hz) and low noise accelerometers (0.05mg/√Hz). In-run gyro bias is 3°/hour (1σ).
Environmental Tolerance: Operates in temperatures from -40°C to +85°C and can be stored between -55°C to +100°C.
Physical Characteristics: Weighs less than 160 grams with a compact size of 113 cm³ (6.88 in³).
Power Requirements: Operates on an input voltage range of +7V to +36V, with typical power consumption under 0.9W.

Applications: The system is suitable for platform stabilization, antenna stabilization and pointing, EO/IR stabilization, railway motion monitoring, navigation, flight control, automotive testing, and laboratory use.

Additional Features: The system includes SDK for attitude indicator display and data display & recording software. It is classified under Commerce ECCN7A994 (NLR) for export.

Limitations: Specifications are subject to change without notice, and the document is marked as a preliminary specification.

Catalog excerpts

Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS G PS/AH RS INS/GPS •High Performance NON-ITAR Commercial MEMS GPS-Aided INS with CAN BUS and RTK Input • 6 NMPH Free Inertial (Short-Term GPS Outages) • 72 Channel GNSS: GPS, GLONASS, BeiDou, QZSS & SBAS (Galileo Ready*) • SBAS: WAAS, EGNOS & MSAS •Up to 18 Hz Navigation Update Rate GPS • GPS Velocity Accuracy 0.05 m/s • GPS Heading Accuracy 0.3 degrees • GPS Horizontal Accuracy ±2.0m CEP w/SBAS • Pitch & Roll Angles ±0.1° stationary • Ultra Low Noise Gyros 0.0016° /sec/^Hz • Low Noise Accels 0.05mg/^Hz • In-Run Gyro Bias 3°/hour 1a • Fully Compensated Bias & Scale Factor Over Temperature -40°C to +85°C • RS422/RS485/CAN 2.0B Serial Data Format • Low Power <0.9 Wtypical • Input Voltage +7V to 36V • Light Weight: <160 grams • Small Size: 113cm3/6.88in3 Applications Platform Stabilization Antenna Stabilization Antenna Pointing EO/IR Stabilization Railway Motion Monitoring Navigation Flight Control Automotive Testing Laboratory Use Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE o®$o [email protected] www.gladiatortechnologies.com

Open the catalog to page 1