*myaeroexpo

LandMark™01 IMU

Product catalog summary

Overview: The LandMarkTM 01 IMU is a low-cost, small-sized MEMS Inertial Measurement Unit (IMU) designed for various stabilization and navigation applications. It features a compact 1-inch cube design with advanced specifications for performance and efficiency.

Specifications:

Size: 15.7 cm³ / 0.96 in³
Weight: Less than 26 grams
Power Consumption: Typical 200 mW, Maximum 270 mW at 5 V
Voltage Range: +3.8 V to +5.5 V
Operating Temperature: -40°C to +85°C
Non-Operating Temperature: -55°C to +85°C
Output Data Rate: Up to 2.5 kHz, with external sync input up to 5 kHz
Sensor Bandwidth: 250 Hz
Shock Resistance: 500g’s ½ sine 1 msec
Vibration Resistance: 6gRMS (20 Hz to 2 kHz)
MTBF: 93,636 hours

Performance Parameters:

Gyro Noise: 0.0035°/sec/√Hz
Accel Noise: 0.09 mg/√Hz
In-Run Gyro Bias: 10°/hour 1σ
Bias Over Temperature: ≤ 0.1°/sec 1σ
Compensated Misalignment: ≤ 1 mrad 1σ
G-Sensitivity: ≤ 0.002°/sec/g 1σ
Scale Factor Error: ≤ 0.075% 1σ for rate axes, ≤ 0.07% 1σ for accel axes
Sensor Resolution: 0.001°/sec for rate axes, 0.035 mg for accel axes

Applications: The IMU is suitable for platform stabilization, antenna stabilization and pointing, EO/IR stabilization, LIDAR stabilization, low-cost navigation, and flight testing.

Additional Features:

Full temperature compensation for bias and scale factor
Ultra-low power consumption
Self-test functionality with logic 1 = 3.3 V at Pin 8

Catalog excerpts

LandMark™ 01 IMULow Cost Small 1” Cube MEMS IMU Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS G PS/AH RS INS/GPS NON-ITAR MEMS IMU Small Cube IMU 15.7cm3/0.96in3 Low Gyro Noise 0.0035°/secAlHz Low Accel Noise 0.09mg/lHz Wide Sensor Bandwidth 250 Hz In-Run Gyro Bias 10°/hour 1o Bias Over Temperature < 0.1°/sec 1o Compensated Misalignment < 1 mrad 1o G-Sensitivity < 0.002°/sec/g 1o Full Temperature Compensation (Bias & SF) Output Data Rate up to 2.5 kHz (selectable) External Sync Input (up to 5 kHz) Ultra Low Power < 200 mW typical Low Voltage +3.8 V to +5.5 V Light Weight < 26 grams Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: +1.425.396.0829 Fax: +1.425.396.1129 [email protected] www.gladiatortechnologies.com

Open the catalog to page 1

Axes (Top View) Right Hand Rule LandMark™ 01 IMU LMRK01IMU-490-15-100 If Pins 6 or 3 are not used connect to Pin 7. Specification subject to change without notice

Open the catalog to page 2

LandMark™01 IMU

LandMark™01 IMU

Catalog excerpts

All Gladiator Technologies catalogs and technical brochures