LandMark™007 IMU

Product catalog summary

Overview: The LandMarkTM 007 IMU is an ultra-small, high dynamics inertial measurement unit (IMU) designed for various stabilization and navigation applications. It is a non-ITAR MEMS IMU, notable for its compact size and high performance.

Specifications:

Dimensions: 0.7-inch cube, making it the smallest in its performance class.
Performance: Capable of handling up to 2000°/sec and 65g or 98g range.
Noise and Sensitivity: Low gyro noise of ≤ 0.0045°/sec/√Hz at 2000°/sec, with a wide sensor bandwidth of 250 Hz.
Stability: Gyro bias in run is 10°/hour (1σ), with bias over temperature ≤ 0.1°/sec (1σ).
Alignment and Sensitivity: Compensated misalignment ≤ 0.5 mrad (1σ), G-sensitivity ≤ 0.003°/sec/g (1σ).
Calibration: Fully temperature calibrated for bias and scale factor.
Durability: Can withstand vibration up to 15grms and shock up to 1000g.
Weight and Power: Weighs less than 25 grams and consumes ultra-low power (< 180 mW typical).
Voltage and Connectivity: Operates on low voltage (+3.8 V to +5.5 V) with RS422/485 serial data up to 5 kHz and external sync input up to 7 kHz (3.3 V logic).

Applications: The IMU is suitable for platform stabilization, antenna stabilization and pointing, EO/IR stabilization, LIDAR stabilization, low-cost navigation, flight testing, and high vibration environments.

Export Classification: Classified under Commerce ECCN7A994 (NLR).

Additional Notes: Specifications are subject to change without notice. The IMU can be customized with different rate ranges in customer-specified axes.

Catalog excerpts

Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Antenna Stabilization Antenna Pointing EO/IR Stabilization LIDAR Stabilization Low Cost Navigation Flight Testing High Vibration Environments Products: Gyros Accelerometers IMU VG AHRS VG/GPS GPS/AHRS INS/GPS Non-ITAR MEMS IMU Smallest (0.7” cube) IMU in its Performance Class Up to 2000°/sec & 65g or 98g Range Applications Low Gyro Noise < 0.0045°/sec/VHz (2000°/sec) platform Stabilization Wide Sensor Bandwidth 250 Hz Gyro Bias In Run 10°/hour 1o Bias Over Temperature < 0.1°/sec 1o Compensated Misalignment < 0.5 mrad 1o G-Sensitivity < 0.003°/sec/g 1o Full Temperature Calibration (Bias & SF) Vibration 15grms Shock 1000g Light Weight < 25 grams Ultra Low Power < 180 mWtypical Low Voltage +3.8 V to +5.5 V RS422/485 Serial Data up to 5 kHz (selectable) External Sync Input (up to 7 kHz, 3.3 Vlogic) Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: +1.425,396.0829 Fax: +1.425.396.1129

Open the catalog to page 1

Axes (Top View) Right Hand Rule * LMRK007 can use different rate ranges in customer specified axes. If Pins 6 or 8 are not used connect to Pin 7. Specification subject to change without notice

Open the catalog to page 2

LandMark™007 IMU

LandMark™007 IMU

Catalog excerpts

All Gladiator Technologies catalogs and technical brochures