LandMark™005 IMU

Product catalog summary

Overview: The LandMarkTM 005 IMU is an ultra-small, high-performance inertial measurement unit (IMU) with a compact size of 0.6 inches. It is designed for applications requiring precise motion sensing and stabilization.

Specifications:

Non-ITAR MEMS IMU, making it accessible for international use.
Smallest in its performance class with a 0.6-inch cube size.
Measurement range up to 490°/sec for gyroscopes and 15g for accelerometers.
Low gyro noise of less than 0.0028°/sec/√Hz and low accelerometer noise of less than 0.075mg/√Hz.
Wide sensor bandwidth of 250 Hz.
Gyro bias in-run stability of 5°/hour with a 1σ confidence level.
Temperature-induced bias variation of less than 0.1°/sec at 1σ.
Compensated misalignment of less than 0.5 mrad at 1σ.
G-sensitivity of less than 0.001°/sec/g at 1σ.
Full temperature calibration for bias and scale factor.
Vibration tolerance of 8grms and shock resistance up to 600g.
Lightweight design, weighing less than 18 grams.
Ultra-low power consumption, typically under 200 mW.
Output data rate selectable up to 5 kHz, with external synchronization up to 8 kHz.

Applications: The IMU is suitable for various stabilization and navigation applications, including platform stabilization, antenna stabilization and pointing, EO/IR stabilization, LIDAR stabilization, low-cost navigation, and flight testing.

Export Classification: The product is classified under Commerce ECCN7A994 (NLR), indicating no license required for export.

Additional Information: The specifications are subject to change without notice, and the document includes a reference to the revision date of March 18, 2007, and serial number 500.

Catalog excerpts

Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS G PS/AH RS INS/GPS NON-ITAR MEMS IMU Smallest (0.6" cube) IMU in its Performance Up to 490°/sec & 15g Range Low Gyro Noise <. 0.0028°/sec/VHz Low Accel Noise < 0.075mg/VHz Wide Sensor Bandwidth 250 Hz Gyro Bias In-Run 5°/hour 1a Bias Over Temperature < 0.1°/sec 1a Compensated Misalignment <0.5 mrad 1a G-Sensitivity <. 0.001°/sec/g 1a Full Temperature Calibration (Bias & SF) Vibration 8grms Shock Resistant 600g Light Weight <18 grams Ultra Low Power < 200 mW typical Output Data Rate up to 5 kHz (selectable) External Sync up to 8 kHz (selectable) Gladiator Technologies Division LKD Aerospace 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: +1.425.396.0829 Fax: +1.425.396.1129 [email protected] www.gladiatortechnologies.com

Open the catalog to page 1