G150Z Single-Axis Gyro
3Pages

Non-ITAR Commercial MEMS Gyro Ultra Low Noise 0.001°/sec/-/Hz lo Short Term Bias <0.0003°/sec lo Bias Over Temperature <0.l°/sec lo Bandwidth 200Hz G-Sensitivity <0.01°/sec/g 2o Axis Alignment <4mrad lo Low Power < 20 mA Typical Low Voltage +5V (single sided power) Bipolar "VSG" Compatible Signal Light Weight 28 grams FFF with G50Z/G100Z Gyro Voltage Output Internal Temperature Sensor Built-In-Test (BIT) Monitor Shock Resistant 500g Vibration 6 gRMS High MTBF Export Classification: Commerce ECCN7A994 Applications EO/IR Stabilization Antenna Stabilization & Pointing Platform Stabilization Flight Control Automotive Testing Navigation Laboratory Use Gladiator Technologies High Performance Inertial MEMS Gladiator Technologies Division LKD Aerospace, Inc 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: 425.396.0829 Fax: 425.396.1129 Email: sales@gladiatortechnologies.com Web: www.gladiatortechnologies.com

Gladiator Technologies Division LKD Aerospace, Inc 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: 425.396.0829 Fax: 425.396.1129 Email: sales@gladiatortechnologies.com Web: www.gladiatortechnologies.com

Rate output is Pin 1 with respect to Pin 6. Temperature is Pin 2 with respect to Pin 6. BIT OK is logic "1", fail = "0". Loads: >5k Ohms and <100pf on Gyro, <500pf on Vref and Temp. Gladiator Technologies Division LKD Aerospace, Inc 8020 Bracken Place SE Snoqualmie, WA 98065 USA Tel: 425.396.0829 Fax: 425.396.1129 Email: sales@gladiatortechnologies.com Web: www.gladiatortechnologies.com