DIGS™100
2Pages

Add to favorites

{{requestButtons}}

Catalog excerpts

Automated Testing Comprehensive ERP Environmental Test Lab: - Shock - Vibration - Temperature Calibration - G-Sensivity -Axis Alignment - Centrifuge - GPS Simulation Products: Gyros Accelerometers IMU VG AHRS VG/GPS G PS/AH RS INS/GPS Utility Downhole Orientation Module Rugged Environmentally Sealed Packaging Meets IP68 1" Diameter X 2.28" Length Yaw and Toolface Angles 0.5° 1o Pitch and Roll Angles 0.1° lo In-Run Gyro Bias 5°/hour lo Low Gyro Noise 0.0028o/sec/VHz Low Accel Noise 0.075mg/VHz Light Weight < 43 grams Compensated Misalignment 1mrad and g-Sensitivity <0.01/sec/g 1o External Sync Input (1 kHz) Low Power < 305 mW Maximum Low Voltage +5 V (single sided power) Data Rate 100 Hz or 200 Hz (AHRS mode) Jr MMV ^ Gladiator Technologies Division H JSHW}{ 8020 Bracken Place SE Snoqualmie, WA 98065 USA -it- TpI1 +1 RQfi na9Q Fay +1 d?' Applications Utility Directional Drilling & Guidance Vertical Wells

Open the catalog to page 1

Axes (Top View) Right Hand Rule DIGS™100 Yaw j> Roll | P/N: DIGS 100-490-15-100 |Pitch 'I —K Note: This symbol denotes a Twisted Pair -5-Note: Any unused inputs (Pins 4, 6, 9) must be connected to Signal Ground (Pin 7). Specification subject to change without notice

Open the catalog to page 2

All Gladiator Technologies catalogs and technical brochures

1. 

   LandMark™60 INS/GPS

   3 Pages

2. 

   LandMark™005 INS/GPS

   3 Pages

3. 

   LandMark™005 IMU

   2 Pages

4. 

   LandMark™007 IMU

   2 Pages

5. 

   LandMark™60 IMU

   2 Pages

6. 

   LandMark™65 IMU

   2 Pages

7. 

   LandMark™01 IMU

   2 Pages

8. 

   MRM60 IMU

   2 Pages

9. 

   G150Z Single-Axis Gyro

   3 Pages

10. 

    MEMS A40

    2 Pages

11. 

    MRM Analog 60 IMU

    2 Pages

12. 

    LandMark TM 60 IMU

    2 Pages

13. 

    LandMark TM 005 IMU

    2 Pages

14. 

    LandMark TM 005 INS/GPS

    3 Pages

15. 

    LandMark TM 60 INS/GPS

    3 Pages