FAST® SF Super High Cut Helmet System ■ Super high cut, ballistic shell made of a hybrid composite of the most advanced Carbon, Unidirectional Polyethylene and woven Aramid. ■ High performance evolution of the Ops-Core FAST MT Super High Cut Helmet, with an 8% weight reduction, while maintaining compatibility with FAST head borne accessories. ■ Super high cut shell geometry extends critical coverage over the rear occipital lobe without load carrier interference, and optimizes weight distribution for increased stability, integration, balance, and improved comfort. ■ Ear cut geometry is 16 mm higher than the FAST XP High Cut shell shape, allowing for clearance of larger headset style communication devices. ■ Super High Cut Skeleton Rails offer lower profile with a 30% weight reduction from FAST MT Super High Cut Rails. ■ Features a lightweight Modular Bungee Shroud (MBS) which reduces snag hazards and interference. Integrated carabiner clips improve NVG retention, stability, and reduce interference with rail-mounted accessories. ■ Molded liner features proprietary recessed groove, accommodating over-the-head communications headsets with no interference or user discomfort, and ability to doff and don helmet without removing the headset. ■ Interior of helmet features expanded polypropylene (EPP) liner, offering enhanced impact protection, and molded-in vent holes provide increased airflow and reduce heat stress. ■ Available with three suspension/retention options. Performance Specification*: Modified and Abbreviated Family of Tactical Headborne Systems, dated June 30th 2017 Ops-Core Performance Specification FAST SF PS-1228 Ballistic Testing: *Not all suspension/retention options are tested to full stated standards. ** (Crown BFD 23.4mm, Side BFD 27.1mm, Front BFD 29mm, Back BFD 19.1mm) Shell Construction: Available Sizes: Areal Density: Shell Thickness: Shell Geometry (Curvature): Cut Style (Side Protection): Available Colors: Two-Stage Non Slit Medium (M), Large (L), X-Large (XL), XX-Large (XXL) 1.22 lbs/ft2 (5957 g/m2) 0.220" (5.58mm) FAST Super High Cut Urban Gray Blunt Impact Protection: 150 g's maximum at 10 ft/s. Maximum allowable dent 0.023 Compression Testing: Top-Bottom = .020" (0.51 mm) Max @ 400 lbs. (181.44 kg), Side-Side = .125" (3.18 mm) Max @ 300 lbs. (136.08 kg) lbs. Environmental Resistance: Temperature -Storage and Operating at Ambient, Cold -60° F (-51° C), and Hot +160° F (71° C), Temperature Shock, Flame Resistance, Altitude, Seawater, Field Agent Resistance, Weatherometer

SHELL SIZING & COVERAGE SHELL WEIGHT FAST SF Shell Weight 1.39 lbs (630g) 1.44 lbs (655g) 1.65 lbs (750g) 1.72 lbs (780g) (Shell with Paint & Edge Band) SYSTEM WEIGHT FAST SF System Weight Vented Lux Liner w/ Worm-Dial Fitband 2.31 lbs (1046g) (FAST SF Shell with Suspension/ Retention Options) Vented Lux Liner w/ Occ-Dial Universal Fitband 2.40 lbs (1089g) Vented Lux Liner w/ H-Nape Chinstrap 2.25 lbs (1019g) ("Estimated calculations of weights) Note: All measurements are +/- 3% tolerance Contact Us Ops-Core is committed to designing advanced performance capabilities...