1. Catalogs
  2. GE AVIATION
  3. GE H75 Turboprop Engine
video corpo

GE H75 Turboprop Engine

GE H75 Turboprop Engine

GE H75 Turboprop Engine

Product catalog summary
Overview
The GE H75 is a turboprop engine designed by GE Aviation for business and general aviation aircraft. It offers a maximum of 750 Shaft Horsepower (SHP) for both takeoff and continuous operation, making it suitable for various turboprop aircraft. The engine incorporates advanced technologies for enhanced performance, including improved fuel efficiency and increased temperature margins, which are beneficial for hot-day takeoffs and high-altitude performance. Maintenance is simplified by eliminating the need for recurrent fuel nozzle maintenance and periodic hot section inspections. The engine also features an auto start and limiting unit for ground operations, reducing pilot workload and enhancing operability.

Standard Engine Hardware
  • Fuel control unit
  • Fuel pump
  • Ignition unit
  • ITT transmitter
  • Gas generator speed sensor
  • Oil system sensors and transmitters
  • Torquemeter transmitter
  • Propeller speed governor with Beta switch
  • Propeller speed sensor
  • Propeller overspeed limiter
  • Engine mount isolators
  • Engine auto start and limiter unit

Optional Accessories
  • Engine fire bulkheads
  • Starter/generator
  • Exhaust stacks

Specifications
  • Power Output: 751 shp, 795 eshp
  • RPM: Gas generator (96.9%) – 35,524, Shaft output – 2,080
  • Propeller Rotation: Clockwise from rear
  • Weight: 390 lbs (basic dry mass)
  • Airflow: 8.1 lb/s
  • Fuel: Jet A, Jet A-1
  • Oil: Mil-L 23699C
  • Electrical: 28 VDC
  • Bleed Air: 4% (max continuous)
  • TBO: 3,600 hours, 6,600 cycles
  • Basic Warranty: 1,000 hours, 1,100 cycles, or 24 months (whichever occurs first)

Performance
The engine provides consistent performance across various conditions, with a graph indicating shaft power output relative to outside air temperature (OAT) at sea level and 10,000 ft.

Contact Information
For North & South America, contact Greg Ryan at +1 786 999 0680 or [email protected]. For Europe, Africa, Asia & Australia, contact Michal Ptacnik at +420 222 538 701 or [email protected].
See more

Catalog excerpts

GE H75 Turboprop Engine-1

GE H75 Turboprop Engine Overview The GE H75 expands the GE Aviation turboprop lineup with power and performance tailored for business and general aviation aircraft. Featuring a maximum 750 SHP rating for both Takeoff and Maximum Continuous operation, the H75 is the ideal power solution to meet the requirements of many turboprop aircraft. The GE H75 features sophisticated technologies to reach higher levels of performance than preceding engine models. These technologies deliver sustained shaft horsepower capability for hot-day takeoffs and high altitude performance combined with improved engine fuel efficiency and increased temperature margins. In addition, the unique configuration of the engine simplifies maintenance by eliminating the need for recurrent fuel nozzle maintenance and periodic hot section inspections. Standard engine hardware • Fuel control unit • Fuel pump • Ignition unit • ITT transmitter • Gas generator speed sensor • Oil system sensors and transmitters • Torquemeter transmitter • Propeller speed governor with Beta switch • Propeller speed sensor • Propeller over speed limiter • Engine mount isolators • Engine auto start and limiter unit Optional accessories With the standard auto start and limiting unit for ground operations along with linear throttle response, the GE H75 eases pilot workload and enhances engine value and operability. Engine fire bulkheads Starter/generator Exhaust stacks GE H75 Turboprop Engineideal power for turboprop aircraft

 Open the catalog to page 1
GE H75 Turboprop Engine-2

GE Aviation Business & General Aviation Performance Maximum takeoff power (Preliminary Data) Sea level – standard day Power Output RPM GE Aviation Czech, s.r.o. is a wholly owned subsidiary of the General Electric Company. © 2012 General Electric Company All Rights Reserved. Specifications subject to change without notice. Weight (basic dry mass) Beranových 65 199 02 Praha 9 Czech Republic Propeller Rotation Europe, Africa, Asia & Australia Michal Ptacnik T +420 222 538 701 C +420 602 643 547 [email protected] North & South America Greg Ryan T +1 786 999 0680 C +1 954 292 5312 [email protected]...

 Open the catalog to page 2

All GE AVIATION catalogs and technical brochures

  1. GENX™

    2  Pages

  2. CF34-10A

    2  Pages

  3. CF34-8E

    2  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.