AT-LINE FILTER DEBRIS ANALYSIS FC290
AT-LINE FILTER DEBRIS ANALYSIS FC290
- Accommodates various filter configurations.
- Quantifies both ferrous and non-ferrous debris material.
- Rugged design suitable for shipborne use.
- On-site verification of chip detector warnings.
- Rapid assessment of equipment condition.
- Early identification of component damage.
- Supports go/no-go decision-making to reduce equipment downtime and avoid unnecessary component removals.
- Metal debris size detection: Ferrous ≥115 μm, Non-ferrous ≥400 μm.
- Wash cycle time is user-configurable.
- Wash fluid type: Solvent/Machine Lubricant, with a quantity of 1.3 US Gal and 3-micron filtration.
- 80 μm stainless steel mesh basket, removable and cleanable.
- Semi-automatic patch maker with 47mm Ø / 20 μm mesh filter patch.
- Compatible with cartridge, disposable, or reusable filters up to 9” (h) x 5” Ø.
- LCD display for debris quantity counter.
- Manual pushbutton controls for cycle start/stop.
- Configurable warning and alarm set points.
- RS 232 serial data transfer interface.
- Operational temperature range: 50°F to 104°F.
- Recommended for indoor, sheltered environments.
- Dimensions: 31” (w) x 15.25” (d) x 42” (h), Weight: 200 lbs.
- Electrical power: 110 to 240VAC 50/60 Hz @ 500W.
- Air supply: 3 cfm, 100 psi maximum.
- Radio Frequency Emissions - FCC Part 15 Subpart B Class A.
- CSA-Code SPE-1000.
- Consumables Kit, Additional Filter Adapters, Spare Parts Package, Power Conditioning Unit available.
- Extended warranty and order information provided.
Catalog excerpts
FC290 Field deployable GO/NO-GO decision support. Quick, reliable and conclusive engine, gearbox, and hydraulic system health information at the flight line. Application FilterCHECK Model FC290 is an automated, field deployable Filter Debris Analysis system that quantifies the amount of wear metal contained in engine, gearbox and hydraulic system filters. FEATURES The FC290 provides accurate and timely detection of abnormal wear of mechanical components by analyzing the debris contained in a filter. The FilterCHECK is operated on-site by placing a filter in the system "wash chamber". Debris is removed from the filter using a combination of fluid and pressurized air. The wash fluid passes through a MetalSCAN sensor which quantifies the amount of ferrous and non-ferrous material. The fluid then runs through a "filter patch" where a representative sample of the debris is collected. The filter patch can be further analyzed in the Accommodates various filter configurations Quantifies both ferrous and non ferrous debris material Rugged design - qualified for ship borne use On-site verification of chip detector warnings BENEFITS Rapid, on-site assessment of equipment condition Early identification of component damage Go/no-go decision support Reduce equipment downtime Avoid unnecessary component removals laboratory to determine its metallurgical content via SEM/EDXRF instruments. Head Office Halifax Office 1011 Polytek Street Ottawa ON K1J 9J3 Canada 65 John Savage Avenue, Unit 5 Dartmouth NS B3B 2C9 Canada 146a Glencoe Drive Mount Pearl NL A1N 4S9 Canada North America
Open the catalog to page 1
COMPLIANCE Radio Frequency Emissions - FCC Part 15 Subpart B Class A CSA-Code SPE-1000 INCLUDED WITH FC290 1) Filter adapter for one filter type (specified by customer) ACCESSORIES 1) Consumables Kit 2) Additional Filter Adapters ENVIRONMENTAL (OPERATIONAL) 3) Spare Parts Package 4) Power Conditioning Unit EXTENDED WARRANTY Contact Gastops for more information ORDER NOW FilterCHECK 290 Order: System-FC290 Head Office Halifax Office 1011 Polytek Street Ottawa ON K1J 9J3 Canada 65 John Savage Avenue, Unit 5 Dartmouth NS B3B 2C9 Canada 146a Glencoe Drive Mount Pearl NL A1N 4S9 Canada North America
Open the catalog to page 2All Gastops catalogs and technical brochures
PORTABLE DEBRIS ANALYZER2 Pages
FILTER DEBRIS ANALYSIS (FDA)2 Pages
