Towable Hydrant Dispenser 450 GPM / 1,700 LPM Base Specifications CHASSIS: RUNNING GEAR SINGLE WRAP FUELING HOSE REEL: Aluminum single wrap style, manual rewind hose reel sized for 2 ½” x 50’ hose, non-ferrous internals. A shut-off valve is installed immediately upstream of the reel. Heavy-duty four wheel trailer. Fully rated suspension (for towing up to 35 MPH). Ackerman style steering axle. FUELING HOSE: One 2” x 50’ aviation fueling hose with N/R male couplings, certified to API 1529 specifications. UNDERWING NOZZLE: One standard 3-lug underwing nozzle with HECV, 100 mesh strainer and swivel. Fully self-contained and maintenance-free pressure control system (no external air source, electrical source, or nitrogen source required). All aluminum deck and hose reel (for low maintenance). Fully integrated solar powered system; includes battery for the interlock system. REFUELING SYSTEM 450 GPM. Other flow rates available. HYDRANT COUPLER: Pressure controlling coupler to mate with 4” API hydrant valve. FILTER / MONITOR: Filter/monitor, 450 GPM rated and equipped with a direct reading differential pressure gauge, purge valve, pressure relief valve, air eliminator and drain valves. F/M meets EI/IP 6th edition specifications. DEADMAN CONTROL: Deadman handle with 50’ cord. PRESSURE CONTROLS: Hose and control valve and pressure controlling coupler. WRAP AROUND STYLE INLET HOSE: Includes 20’ of 2 ½” hose with nonremovable male couplings, certified to API 1529 specifications. PRODUCT RECOVERY TANK: 20 gallon capacity with fill opening and drain valve. PIPING: Schedule 10 aluminum – 150 PSI rated working pressure. GAUGE PANEL: The panel will include a fuel sense pressure gauge, D/P gauge with purge valve, inlet pressure gauge, pressure regulator and emergency shutdown. SAFETY FEATURES: Manual rewind static reel with 50’ cable and clip, brake interlock system, emergency shut down system and one fire extinguisher. COMPLIANCE: Meets all applicable NFPA 407 codes. Design complies with ATA103 requirements. Options The above listed items are for a standard Garsite refueler. All units can be customized to fit your specific requirements. Please contact your Garsite representative for a complete list of available options and configurations. ASME ‘U’ and ‘R’ Certified Facility METER: 450 GPM rated with large numeral reset counter and totalizer, registers in whole U.S. gallons. Garsite Base specifications are accurate at the time of publication, and are subject to change without notice. Custom options are available; please consult your Garsite representative for additional information. ©2015 Wabash National, L.P. All rights reserved. Wabash® and Wabash National® are marks owned by Wabash National, L.P. GAR 0007 10.15 - V1 539 South 10th Street Kansas City, Kansas garsite.com 1-888-GARSITE (toll-free) 9