Jet Refueler
1Pages

Jet Refueler 3,000 Gallon / 11,225 Liter Flow Rates: 300-600 GPM / 1,125-2,250 LPM Base Specifications TANK 3,000 U.S. gallons (3% outage) aluminum tank fully baffled, single compartment, overturn protection, 20” manhole with 10” fill opening with emergency pressure / vacuum vents CHASSIS Conventional cab-chassis, diesel engine, automatic transmission. (Detailed specifications available upon request.) STANDARD DIMENSIONS HOSE: One 2” x 50’ and one 1½” x 50’ aviation fueling hose with N/R male couplings, certified to API 1529 OVERWING NOZZLE: Jet overwing nozzle with swivel and 100 mesh strainer UNDERWING NOZZLE: One international standard 3-lug underwing nozzle with quick disconnect and swivel BOTTOM LOADING: Includes a jet level sensor control system for automatic, high-level shut-off with precheck. The bottom loading adapter, capable of accepting a standard underwing nozzle, is installed on the driver side. A gauge and shut-off valve shall be supplied immediately downstream of bottom load adapter for re-circulation and testing. DEFUEL: Fuel/defuel system operates in conjunction with bottom loading system to include overfill protection REFUELING SYSTEM PIPING: Schedule 10 aluminum – with 150 PSI rated working pressure PUMP: Centrifugal type, PTO driven, hot shift. 300 GPM / 1,150 LPM. TEST: Flow tested with fuel for performance to rated specifications FILTER/SEPARATOR: 5th Edition Horizontal Filter/Separator – 300 GPM rated with differential pressure gauge, air eliminator, water defense and drain valve. F/S meets API 1581 specifications and qualification procedures for solids and water removal. Filter Monitor is also available, if required as an option. FINISH: Cab painted factory white. Aluminum tank in natural polished finish. Equipment painted silver. DEADMAN AND PRESSURE CONTROL: Electrically operated inline deadman/pressure control valve provides primary pressure control. Secondary pressure control regulated by mechanical hose end control valve. COMPLIANCE: Meets all applicable NFPA 407 & 385 codes. Design complies with ATA-103 requirements. METER: One meter, with large numeral reset counter and totalizer, registers in whole U.S. gallons The above listed items are for a standard Garsite refueler. All units can be customized to fit your specific requirements. Please contact your Garsite representative for a complete list of available options and configurations. VENTURI: Sized to compensate for pressure loss HOSE REELS: Two reels; one single wrap sized for 2½” x 50’ hose, and one sized for 1¼” x 50’ hose, non-ferrous internals, explosion proof electric rewind motors and switches, auxiliary manual rewind. An isolation shut-off valve is installed immediately upstream of reel. SAFETY FEATURES: Static reel with 50’ cable and bonding clamp, brake interlock system, emergency shut-down system and two fire extinguishers ASME ‘U’ and ‘R’ Certified Facility Garsite Base specifications are accurate at the time of publication, and are subject to change without notice. Custom options are available; please consult your Garsite representative for additional information. ©2015 Wabash National L.P. All rights reserved. Wabash® and Wabash National® are marks owned by Wabash National, LP GAR 0002 10.15 - V1 539 South 10th Street Kansas City, Kansas garsite.com sales@garsite.com 1-888-GARSITE (toll-