7,000 Gallon Jet Refueler
1Pages

Jet Refueler 7,000 Gallon / 26,180 Liter Flow Rates: 300-600 GPM / 1,125-2,250 LPM Base Specifications OVERWING NOZZLE: Jet overwing nozzle with swivel and 100 mesh strainer UNDERWING NOZZLE: One international standard 3-lug underwing nozzle with quick disconnect and swivel 7,000 U.S. gallons (3% outage), aluminum tank fully baffled, single compartment, overturn protection, one 20” manhole with 10” fill opening with emergency pressure / vacuum vents and two 20” inspection manholes BOTTOM LOADING: Includes a jet level sensor control system for automatic, high-level shut-off with precheck. The bottom loading adapter is capable of accepting a standard underwing nozzle. A shut-off valve shall be supplied immediately downstream of bottom load adapter. Conventional cab-chassis, diesel engine, automatic transmission. Power steering. (Detailed specifications available upon request.) DEFUEL: Fuel/defuel system operates in conjunction with bottom loading system to include overfill protection STANDARD DIMENSIONS PIPING: Aluminum – 150 PSI rated working pressure LADDER BRACKETS: On rear bumper REFUELING SYSTEM PUMP: Centrifugal type, PTO driven, hot shift FILTER/SEPARATOR: 5th Edition Horizontal Filter/Separator – 300 GPM rated with differential pressure gauge, air eliminator, water defense and drain valve. F/S meets API 1581 specifications and qualification procedures for solids and water removal. Filter Monitor is available as an option. DEADMAN AND PRESSURE CONTROL: Inline deadman/pressure control and shut-off valve provides primary pressure control. Secondary pressure control regulated by mechanical hose end control valve. METER: One meter, 300 GPM rated with large numeral reset counter and totalizer, registers in whole U.S. gallons HOSE REELS: Two drum style hose reels; one sized for 2½” x 50’ hose, and one sized for 1½” x 50’ hose, non-ferrous internals, explosion proof electric rewind motors and switches, auxiliary manual rewind. An isolation shut-off valve is installed immediately upstream of reel. TEST: Flow tested with fuel for performance to rated specifications FINISH: Cab painted factory white. Aluminum tank in natural polished finish. Equipment painted silver. SAFETY FEATURES: Static reel with 50’ cable and bonding clamp, brake interlock system, emergency shut-down system and two fire extinguishers COMPLIANCE: Meets all applicable NFPA 407 & 385 codes. Design complies with ATA-103 requirements. Options The above listed items are for a standard Garsite refueler. All units can be customized to fit your specific requirements. Please contact your Garsite representative for a complete list of available options and configurations. ASME ‘U’ and ‘R’ Certified Facility HOSES: One 2” x 50’ and one 1¼” x 50’ aviation fueling hoses with N/R male couplings, certified to API 1529 Garsite Base specifications are accurate at the time of publication, and are subject to change without notice. Custom options are available; please consult your Garsite representative for additional information. ©2015 Wabash National L.P. All rights reserved. Wabash® and Wabash National® are marks owned by Wabash National, LP GAR 0004 10.15 - V1 539 South 10th Street Kansas City, Kansas garsite.com sales@garsite.com 1-888-GARSITE (tol