High performance perimeter protection •  gas, mining & processing plants Oil, •  Military & government facilities •  Power, telecoms & water utilities •  Airports, rail & road •  Correctional facilities •  Industrial & commercial With an FFT Secure Fence™ system, you can detect and locate intrusions on perimeters and borders that were, until now, always thought to be too expensive to protect. The low cost fiber optic sensor cable is easily attached to the fence, pinpointing the location of fence climbing, lifting or cutting to within 10 meters (30 feet) to 25 meters (80 feet) or better for fences of up to 80km (50 miles) in length. FFT’s industry leading advanced signal processing minimises nuisance alarms, without compromising intrusion detection sensitivity. FFT world leaders in fiber optic intrusion detec

FFT Secure Fence is the ultimate fiber optic perimeter intrusion detection and location Know when to look at your camera displays, dispatch your security staff or point a specific security camera at a suspected intrusion. Confidently detect intrusion. Your security staff can have faith in the combination of high probability of detection and extremely low nuisance alarm rate delivered by FFT Secure Fence. Save significant up-front costs, as only one system is required to support up to 80km (50 miles) of fiber optic sensing cable. FFT Secure Fence™ delivers the lowest installed cost per foot. Minimise...

How It Works Simple to install and operate, the FFT Secure Fence system delivers truly outstanding levels of detection and location combined with one of the lowest Nuisance Alarm Rates available. It is maintenance free; operating easily and reliably under a wide range of operational and environmental conditions—day after day, year after year. Secure Fence controllers are connected to fiber optic cables that are mounted on fences and Housed in secure control room gates to detect climbing, cutting or lifting, or buried along fence-lines to detect digging. Each controller transmits laser light down...

•  A Secure Fence controller connects to a sensor cable straight run of 40km (25 miles) or a loop of 80km (50 miles) •  Locate intrusions to within 10 meters (30 feet) to 25 meters (80 feet), depending on fence type •  Detection of multiple simultaneous intrusions along the fence •  No electronics or power in the field •  Rapid in-field repair •  Two year warranty extendable to life of product •  Immune to EMI/RFI •  Intrinsically safe FFT Secure Fence Specifications Fiber Optic Sensor Sensing Configuration Location Accuracy Zone Length & Number Probability of Detection (POD) Nuisance Alarm Rate...