Standard 18,000 Litre Capacity
2Pages

Standard 18,000 Litre Low Profile Aircraft Refueller An 18,000 litre capacity rigid type refueller mounted on a 4x2 chassis cab. Suitable for towing a 45,000 litre capacity drawbar trailer the refueller is equipped with a rear mounted elevating platform with the main delivery and metering equipment located immediately behind the drivers cab. The refueller is constructed in accordance with current BS EN 12312-5 and JIG 1 issue 11 requirements where applicable. Operating Temperature of -20°C to +50°C Features Dimensions Height 2.85/2.90m +/- 50mm Width 3.00m Length 10.50/11.00m Flow rate Fuelling Rear deck mounted hoses 3000 or 3400 lpm (63mm x 3.5m) Reel hoses – 2 x 1100lpm (Choice of Underwing or Overwing) Maximum 300 lpm through any hose Bottom Loading Fuel Pump Gorman Rupp inline self-priming centrifugal pump type 06D1-GHH Filter water monitor or filter water separator constructed in carbon steel with epoxy coat lining meeting the latest requirements of IP1583 and IP1581 respectively and is fitted with high differential pressure shutdown system. Satam or Avery Hardoll positive displacement meter with Veeder Root EMR3 or Masterload II electronic display. Hoses Reel Hose Underwing Reel Hose Overwing Deck Hoses Elevating platform 2-off Ø50mm bore x 20m long meeting the requirements of BS1825 Type C Elaflex or Goodyear. 2-off Ø63mm bore x 3.5m long type meeting the requirements of BS1825 Type C Elaflex or Goodyear. Hydraulically operated scissor mechanism platform with floor to ground height range from 1.5m to 4.2m. Platform equipped with raise/lower control and emergency lower control valve. Access is via a fixed vertical ladder positioned at the rear. Hose End Equipment Controller (HEPC) Hose end pressure control couplings (HEPC) equipped with 45psi regulator, vacuum breaker, 100mesh screen.

Standard 18,000 Litre Low Profile Aircraft Refueller Refueller Tank Safety Systems 18,000 litre usable capacity, constructed in aluminium alloy with 3% expansion allowance or Stainless Steel and equipped:  2-off Ø500mm recessed manlid assemblies c/w Pressure / vacuum vent valve, Ø250mm hinged inspection lids  Calibrated captive type dipstick assembly  Primary and secondary overfill systems  Side mounted float actuated contents gauge  Pneumatically actuated Ø150mm main footvalve  Pneumatically actuated Ø80mm sump foot valve  Pneumatically actuated Ø100mm bottom loading valve  Tank...