A semi-articulated refueller incorporating a 4x2 chassis and single trailer axle configuration for optimal manoeuvres on the airport ramp. The elevating platform and refuelling unit are mounted on the chassis unit immediately behind the cab, with the semi-trailer tank attached by means of a liquid 5th wheel. The refueller is designed and constructed in accordance with the latest European Standards BS EN 12312-5 and JIG 1 Issue 11 requirements where applicable. Operating Temperature of -20°C to +50°C Features Dimensions Height: 2.90m +/- 50mm (excluding beacon) Width: 3.00m Length: 17.00m Flowrate Fuelling 2,850 LPM through 2 x deck hoses 1,000 LPM through 1 x reel hose 300LPM through 1 x overwing reel hose Defuelling 300LPM through 2 x deck hoses or reel hoses 100LPM through 1 x overwing hose Bottom Loading 2,500LPM Fuel Pump Gorman Rupp 06D1 GAR Self-priming centrifugal pump (PTO driven) Hoses Reel Hose Underwing Reel Hose Overwing Deck Hoses Elevating platform Filter water monitor or filter water separator constructed in carbon steel with epoxy coat lining meeting the latest requirements of IP1583 and IP1581 respectively and is fitted with high differential pressure shutdown system. Satam or Avery Hardoll positive displacement meter with Veeder Root EMR3 or Masterload II electronic display. Flowrate up to 3000LPM for deck hoses Flowrates up to 300/1,000LPM (separately) for reel hoses Aviation hoses meeting EN1825 type ‘C’ Elaflex or Goodyear 050mm x 20m long 038mm x 25m long 063mm x 3.5m long Hydraulically operated scissor mechanism platform front mounted with floor to ground height range from 1.5m to 4.2m. Platform equipped with raise/lower control and emergency lower control valve Hose End Equipment Controller (HEPC) Liquid 5th Wheel Hose end pressure control (HEPC) couplings equipped with 45psi regulator, vacuum breaker, 100mesh screen. Fuel transfer from the refueller tank to the suction side of the pump is through a liquid 5th wheel assembly incorporating a 0150mm swivel.

Refueller Tank Safety Systems Pipework Hosereel The mechanical connection to the chassis unit is via a 01000mm turntable. 40,000L useable capacity constructed in aluminium alloy with 3% expansion allowance. Three external 0500mm manholes/lids with pressure vacuum vents with Roll over safety valve and flame traps on vent valves Internal 0610mm access manholes Single 0254mm Bayham gauge Calibrated dipstick Two jacking points Valenced tank top to protect the handrails and manlids in the event of a roll over. Rear access ladder, pneumatically actuated single-sided folding safety rail and non-slip...